Honda Monkey 125 SP Takegawa Super Multi TFT Meter 05-05-0061
Description
Compatible car models:
Monkey 125(JB02/JB03)
Monkey 125 (JB02-1000001~)
Monkey 125 (JB03-1000001~)
Monkey 125 Thai model (MLHJB02/MLHJB03)
【accessories】
・Dedicated sub-harness
・Dedicated stay set
*How to install the O2 sensor boss: It is necessary to drill a hole in the exhaust pipe and fix the O2 sensor boss by welding.
* Simultaneous display of the temperature gauge and the air-fuel ratio gauge is not possible. The function display can be switched depending on the attached sensor.
*For the Super Multi TFT Meter & Screen Kit, it is necessary to drill holes in the headlight cover to install the screen.
*It cannot be installed simultaneously with H.I.D., LED headlights made by other companies, and fog lamps. Some ballasts/inverters (voltage converters) emit high-voltage noise that adversely affects digital circuits, causing product failures and malfunctions.
*Regarding gear position setting: Both the speed signal and the engine speed signal must be input to the Super Multi TFT meter to set the gear position.
Therefore, automatic reading work by "actual driving" is required.
Please do not set the gear position in urban areas because there are many traffic lights and traffic and it is dangerous.
When driving, select a road with good visibility, check the surrounding road conditions, and proceed with caution.
*Other products are included in the image.
* Product specifications may change due to manufacturer's circumstances. note that.
_____________________________
It is a multimeter equipped with many functions such as speed, rpm, gear position, thermometer, fuel gauge, time, battery voltage display, tire outer diameter correction, power test function, etc.
Adopted a pointer type tachometer with excellent visibility and digital display by TFT liquid crystal.
■ Product composition for MONKEY 125
A dedicated sub-harness and a dedicated stay set are included.
A rubber mount that softens the vibration of the meter is used for the meter fixing part.
■Function
・Speedometer 0-360km/h
Speed setting (setting range 300-2500mm setting unit 1mm)
Speed warning light (setting range 30-360km/h setting unit 1km/h)
Maximum speed record (display range 0-360km/h setting unit 1km/h)
・Guide type tachometer 0-13000rpm
Rotation speed warning light (Setting range: 1000-13000rpm Setting unit: 100rpm)
・Digital tachometer 0-20000rpm
RPM warning light (setting range: 1000-20000rpm, setting unit: 100rpm)
Ignition setting (setting range 0.5・1-24 setting range Hi Act・Lo Act)
・Christian calendar / month and day / day of the week
By setting it, it will be displayed on the opening screen when the key is turned on.
The day of the week is automatically entered when the year and month and day are set.
■ Odo/trip meter, maintenance mileage, gear position
・Odometer 0-999999km
(Display unit: Returns to 0 when the range exceeds 1km)
Total mileage
User odo setting (arbitrary input of start point distance)
・Trip meter A, B 0-9999.9km
(Display unit: 0.1 km, returns to 0 when the range is exceeded)
Display switching to trip meter B by operating an external switch
・Oil change time warning
The entered mileage will automatically decrease as you drive.
Maintenance distance (notification mode)
(Setting range: 500-16000km Setting unit: 100km)
・Gear position
(Display contents: all gears displayed, all gears hidden)
Gear number registration function by learning mode
■ Clock, voltmeter, thermometer, fuel gauge
・Clock/day of the week
(Setting range: 12 hours or 24 hours)
The day of the week is automatically entered when the year and month and day are set.
・voltmeter
(Display range: 8-18V)
Voltage warning light (setting range 8-18V setting unit: 0.1V)
・Thermometer (display range: 0-250 degrees)
By purchasing the SP TAKEGAWA drain bolt separately, it is possible to measure the temperature at the drain bolt part.
Temperature warning light (setting range: 60-250 degrees)
Maximum temperature record (setting range: 0-250 degrees)
・Fuel gauge (display range: 6 levels)
Fuel sensor resistance value preset
100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance value setting Resistance value range: 0-1500Ω
fuel warning light
■ Air-fuel ratio meter, power test function, indicator lamp, external switch
・Air-fuel ratio gauge (display range: 12.1-17.5)
A separate SP TAKEGAWA O2 sensor and O2 sensor boss are required.
How to install the O2 sensor boss: It is necessary to drill a hole in the exhaust pipe and fix the O2 sensor boss by welding.
Simultaneous display of temperature gauge and air-fuel ratio gauge is not possible.
The function display can be switched depending on the attached sensor.
・Power test function
Target Speed
Target Distance
Top speed record
Each record is displayed as a record.
The highest record is displayed at the top, and No.2 and below are displayed in order of measurement.
Records can be reset.
The target speed/distance setting is set to the specified numerical value in the function setting.
・Indicator lamp
Warning light, turn lamp, high beam lamp
Neutral lamp/Engine warning light
Oil check run/ABS lamp
・External switch
All meter operations and function settings are performed using external switches supplied with the meter.
■ Backlight
・Backlight
Day/Night mode LCD screen AUTO switching function
Brightness adjustment function
Lighting color switching function
Lighting color: white, red, orange, green, blue, yellow
In Day mode, only the needle-type tachometer scale can be changed.
Night mode can change the pointer type tachometer scale and the gradation part of the main liquid crystal
Monkey 125(JB02/JB03)
Monkey 125 (JB02-1000001~)
Monkey 125 (JB03-1000001~)
Monkey 125 Thai model (MLHJB02/MLHJB03)
【accessories】
・Dedicated sub-harness
・Dedicated stay set
*How to install the O2 sensor boss: It is necessary to drill a hole in the exhaust pipe and fix the O2 sensor boss by welding.
* Simultaneous display of the temperature gauge and the air-fuel ratio gauge is not possible. The function display can be switched depending on the attached sensor.
*For the Super Multi TFT Meter & Screen Kit, it is necessary to drill holes in the headlight cover to install the screen.
*It cannot be installed simultaneously with H.I.D., LED headlights made by other companies, and fog lamps. Some ballasts/inverters (voltage converters) emit high-voltage noise that adversely affects digital circuits, causing product failures and malfunctions.
*Regarding gear position setting: Both the speed signal and the engine speed signal must be input to the Super Multi TFT meter to set the gear position.
Therefore, automatic reading work by "actual driving" is required.
Please do not set the gear position in urban areas because there are many traffic lights and traffic and it is dangerous.
When driving, select a road with good visibility, check the surrounding road conditions, and proceed with caution.
*Other products are included in the image.
* Product specifications may change due to manufacturer's circumstances. note that.
_____________________________
It is a multimeter equipped with many functions such as speed, rpm, gear position, thermometer, fuel gauge, time, battery voltage display, tire outer diameter correction, power test function, etc.
Adopted a pointer type tachometer with excellent visibility and digital display by TFT liquid crystal.
■ Product composition for MONKEY 125
A dedicated sub-harness and a dedicated stay set are included.
A rubber mount that softens the vibration of the meter is used for the meter fixing part.
■Function
・Speedometer 0-360km/h
Speed setting (setting range 300-2500mm setting unit 1mm)
Speed warning light (setting range 30-360km/h setting unit 1km/h)
Maximum speed record (display range 0-360km/h setting unit 1km/h)
・Guide type tachometer 0-13000rpm
Rotation speed warning light (Setting range: 1000-13000rpm Setting unit: 100rpm)
・Digital tachometer 0-20000rpm
RPM warning light (setting range: 1000-20000rpm, setting unit: 100rpm)
Ignition setting (setting range 0.5・1-24 setting range Hi Act・Lo Act)
・Christian calendar / month and day / day of the week
By setting it, it will be displayed on the opening screen when the key is turned on.
The day of the week is automatically entered when the year and month and day are set.
■ Odo/trip meter, maintenance mileage, gear position
・Odometer 0-999999km
(Display unit: Returns to 0 when the range exceeds 1km)
Total mileage
User odo setting (arbitrary input of start point distance)
・Trip meter A, B 0-9999.9km
(Display unit: 0.1 km, returns to 0 when the range is exceeded)
Display switching to trip meter B by operating an external switch
・Oil change time warning
The entered mileage will automatically decrease as you drive.
Maintenance distance (notification mode)
(Setting range: 500-16000km Setting unit: 100km)
・Gear position
(Display contents: all gears displayed, all gears hidden)
Gear number registration function by learning mode
■ Clock, voltmeter, thermometer, fuel gauge
・Clock/day of the week
(Setting range: 12 hours or 24 hours)
The day of the week is automatically entered when the year and month and day are set.
・voltmeter
(Display range: 8-18V)
Voltage warning light (setting range 8-18V setting unit: 0.1V)
・Thermometer (display range: 0-250 degrees)
By purchasing the SP TAKEGAWA drain bolt separately, it is possible to measure the temperature at the drain bolt part.
Temperature warning light (setting range: 60-250 degrees)
Maximum temperature record (setting range: 0-250 degrees)
・Fuel gauge (display range: 6 levels)
Fuel sensor resistance value preset
100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance value setting Resistance value range: 0-1500Ω
fuel warning light
■ Air-fuel ratio meter, power test function, indicator lamp, external switch
・Air-fuel ratio gauge (display range: 12.1-17.5)
A separate SP TAKEGAWA O2 sensor and O2 sensor boss are required.
How to install the O2 sensor boss: It is necessary to drill a hole in the exhaust pipe and fix the O2 sensor boss by welding.
Simultaneous display of temperature gauge and air-fuel ratio gauge is not possible.
The function display can be switched depending on the attached sensor.
・Power test function
Target Speed
Target Distance
Top speed record
Each record is displayed as a record.
The highest record is displayed at the top, and No.2 and below are displayed in order of measurement.
Records can be reset.
The target speed/distance setting is set to the specified numerical value in the function setting.
・Indicator lamp
Warning light, turn lamp, high beam lamp
Neutral lamp/Engine warning light
Oil check run/ABS lamp
・External switch
All meter operations and function settings are performed using external switches supplied with the meter.
■ Backlight
・Backlight
Day/Night mode LCD screen AUTO switching function
Brightness adjustment function
Lighting color switching function
Lighting color: white, red, orange, green, blue, yellow
In Day mode, only the needle-type tachometer scale can be changed.
Night mode can change the pointer type tachometer scale and the gradation part of the main liquid crystal