MIG welded mild steel spare wheel carrier designed to fit Citreon Relay, Fiat Ducato, Peugeot Boxer vans. Designed and manufactured in Yorkshire by the Wheeliams team. Our spare wheel carriers are made to order, with a lead time of around 4 weeks. Supplied unfinished in bare metal for you to finish as you wish.
Fixings required to fit the wheel carrier to the van are supplied.
Wheel Carriers bolt to the existing hinges on the door and require two holes drilling in the skin of the door and one hole drilling through each hinge. This wheel carrier can be fitted to vans with 180degree hinges.
Always test fit any bolt-on product before painting to be sure it fits. We will not reimburse for painting if the part is not test fitted prior to painting.
Historically these doors have been very weak around the area that the hinge bolts to. They are common to crack here. By fitting a wheel carrier that braces over the top of the door spanning between the hinges and the door you are actually strengthening this area and therefore making your door less likely to crack in this place. Fitting the wheel carrier stops the hinge from flexing the side of the door which is what causes the stress cracks.
All drilled holes will require any bare metal painting to prevent corrosion. We also bond the door skin mount and the door skin which removes the point load off the bolts whilst also sealing up the hole to prevent water ingress.
Following your order confirmation, you will receive an email with fitting instructions for this product. If you would prefer to study these before placing an order - please don’t hesitate to get in touch.