|
AZ688-2 Wireless Curing Light
Descriptions:
Wireless LED Curing Light 2000mw/cm² Lamp Test Meter Optical Fiber
Because of the Built-in battery of this product and the strict customs,
Please be more familiar with local customs and the circumstances before buying.
Thanks for your understanding!!!
The new brand high quality of curing light has main advantages of others as follows:
1. Excellent quality with competitive price
2. Quick delivery and best service
3. Service tools for dental and easy to maintain and recharge conveniently
4. Large capacity Li-battery can be used for a long one with full charging.
5. Plenty of fiber rods with very reasonable price on sale for you replacement
6. Composes of high power LED, qualified fiber rod.
7. Noiseless; No libration; Generate little heat when working.
8. Imported high power LED and four chips inside.
1. Blue-ray output wavelength:430-485nm.
2. Gradually bright, shiny,bright-wide, the work of three models to choose.
3. Three gear output timing:5s 10s 15s 20s 25s 30s 35s 40s
4. Blue-ray illumination: 5W≥18
5.The effect of curing time: 6s: 2-3mm.
6. Reliable structure and easy operation.
Technical Specifications:
Wavelength: 380-515nm2
Power density: 99-999mw/cm
Only for light probe with a circular emission window: 08-12mm
Measuring accuracy: +/-20%
Adjustable light intensity: 2000mw/cm2
Operating conditions:
Temperature :+10℃to +40℃
Relative humidity: 30% to 75%
Ambient pressure: 700hpa to 1060hpa
Technical parameters:
Output power-----------5w
Size ----------------------diameter 270*208*118mm
Weight-------------------720g
Working voltage--------100-240V AC, 50-60HZ
Packing List:
Main engine of light-curing Device------1 set
Optical Fiber--------------------------------1 piece
Battery----------------------------------------1 piece
Battery Charge Seat-------------------------1 set
Shade Board ---------------------------------1 piece
Instruction Booklet -------------------------1 piece
YS-C Curing Light
Features
NAME：LED curing light
MODEl：YS-C
This high power 2700mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
LED light and Li-on rechargeable battery.
This device can cure all the dental resin known in the market nowadays; with a performance level far
superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5mm
deepness in a few seconds.
Benefits：
1)Very convenient to operate.
2)Small size,cordless and light weighted.
3)No
dazzling strong light which allows you to aim the light to the exact
position and improve the effectiveness of the treatment.
4)No vibration.
5)Noiseless operation.
6)High power rechargeable battery.
7)High powerful light intensity with a maximum reach of 2700MW/cm2.
8)3 different working time modes,exposure time for optional curing:8s/6s/4s.
9)
You can select the correct mode according to the different types of
material you wish to cure,their speed of reaction,and the clinical
protocol you are following.
Best Quality Materials:
* Mono-fibered glass light guides for various applications.
* Anodized aluminum handpiece.
* Latest generation of CMS electronics.
* Very high-quality single L.E.D.
* Li-lon battery with no memory effect
Design and Ergonomics:
* Silent and hygienic, no fan.
* Round surfaces allow for easy and comfortable manipulation.
* Compact, lightweight and well-balanced light guide rotates through 360°.
* Base-charger can be turned in all directions and low battery warning.
* Can be used anywhere in the world. The voltage input is 110V-240V and we will provide you
with the correct according to the shipping destination.
Specifications:
- Blue Light Intensity: 2700mw/c㎡
- Rechargeable Li-ion battery
- Spectrum Range: 420nm- 480nm
- Power : AC110-230V / 50-60Hz
- Time option:8s/6s/4s
- Weight: 0.65kg
-Full Metal shell
Package Includes:
1 LED Curing Light Device
1 High Capacity Rechargeable Battery
1 Charger
1 Charger Socket
X2 Curing Light
Feature:
Technical Parameters:
Light Source:Broad Band LED;
Wavelength Range:385 - 515 nm;
Light Intensity:> 2300mW / cm²;
Battery:Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Input Power:AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes;
Size:Handle:Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure:700hPa - 1060hPa;
Package Contents:
1 × host handle;
1 × charging base;
1 × power ;
1 × user manual.
Operation and function description:
The entire handle is only one button, light built-in button.
1.
For the first time, charge the light curing handle first. the USB cable
of the charger into the USB port of the power ,the power into the
power socket, and finally
Put
the handle on the charging stand; or, insert the USB cable of the
charging stand into the USB port of the computer, and then put the
handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode.
2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode.
|
Blinking Blue | Progressive mode, working time 10 seconds, light
intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4.
Switch machine, in standby mode, press the button a short time to open
the instrument; stop any operation for 60 seconds, into the ultra-low
power standby.
Curing Light
Feature:
Model:LED.B
Wireless
Long standby time
Working more efficiently
Function Keys:
ON/OFF button：
Turn on or turn off the LED blue-ray output
Can make the machine run
Time setting: 5s, 10s, 15s, 20s,25s,30s,35s,40s
Technical:
Charger input:110V-240VAC 50-60Hz
The charger output:DC4.2V 1A
Lithium battery voltage:DC3.7V
Lithium battery capacity:1500mAh
Output optical wavelength:420-480nm
Output light intensity:1200-1400mw/cm2
1set Package:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket
Cv -gun 1 Second Cure Curing Light
LED plus105 1 Second Curing
AZDENT Dental Wireless LED plus105 Curing Light Lamp 1 Second Curing High Power Wide Spectrum
The LED Plus model is a 90-degree, 105-degree Angle with 8 watts. Use 3 blue light plus 1 purple light high-power chip. The effect of light can be seen that the light transmittance of the light cross lens reaches 97%. It is more convenient to light solidify the molars inside the mouth.
！！！Because the light emitted by one of the purple LEDs is invisible to the human eye, the LED lights appear to have only three lights on during use.
INSTALLATION:
• Insert light head into the curing light handpiece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions
• Connect the adapter connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces.
• After switching on the power adapter, insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up
• The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging.
• When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use。
• To check the battery, press and hold the time switch for 4 seconds, display screen will show:
a.) 4.2 – 3.7- Battery is normal
b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo
• Direct charging option from transformer for easy transportation and mobility
OPERATION:
• Turn on the curing light with on/off switch
• his machine has 1S high power. 3S high power. full RAMP PULSE 3'+3'+6'+6'seven working modes. The default mode is (full power) and the default time is 10 seconds.
• Press and hold the time button for 0.1 seconds to select the time.Only three time modes of FULL RAMP PULSE can be selected, which are 05 10 15 20 25, respectively.
• Long press mode button 0.5 seconds to unlock, mode selection can be made, when no operation 30S automatically unlock, and long press mode button 0.5 seconds to unlock.
• Every change of time or mode, there will be a ‘beep’ sound. The curing light will keep the last program selected in memory
• Put on the disposable curing light sleeve to cover the whole curing light for cross-infection control. Then put on the light protective shield and light head protective ring, the curing light is ready for use
• Remove and dispose of the curing light sleeves after every patient
• Curing light will automatically turn off if not in use for 1 minute
SPECIFICATION:
Power supply:Input: AC 100-240V, 50/60Hz
Output :DC 5V/1A
Intensity High: 2500 mw/cm²
Battery: 3.6V, 2600 mAh (9.36Wh)
Handpiece dimension: Φ3.0 cm x 24 cm .
Packing List:
Main unit of the LED x1
Protective light shield x1
Transformer (100 -240V) x1
USB Type-C Chrging line x1
Instruction manual x1
LED PRO105 1 Second Curing
INSTALLATION:
•
Insert light head into the curing light handpiece with a twisting
motion，Ensure that both the direct light source head and the light
curing host are fully connected to their corresponding positions
•
Connect the adapter connector to the USB Type-C charging line, and then
connect the power supply. The magnet tail cap at the bottom of the host
can be stably adsorbed on other metal surfaces.
• After switching on
the power adapter, insert the charging port or pull out the charging
port, the machine will wake up automatically, and the host screen will
light up
• The main panel indicator light "orange" indicates that the
battery is in charge, and the light "green" indicates that the battery
is full, and the machine will automatically stop charging.
• When the
host is charged for one minute in an unused state, the screen will shut
down automatically, and the battery will still be charged until the
battery is full。
• The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use。
• To check the battery, press and hold the time switch for 4 seconds, display screen will show:
a.) 4.2 – 3.7- Battery is normal
b.) Lo- Battery is low
•
When battery is low, curing light circuit will automatically compensate
for power output or turn the light off. Always recharge the curing
light when the battery is low Lo
• Direct charging option from transformer for easy transportation and mobility
OPERATION:
• Turn on the curing light with on/off switch
•
his machine has 3S high power. full RAMP PULSE 3'+3'Five working modes.
The default mode is (full power) and the default time is 10 seconds.
•
Press and hold the time button for 0.1 seconds to select the time.Only
three time modes of FULL RAMP PULSE can be selected, which are 05 10 15
20 25, respectively.
• Long press mode button 0.5 seconds to
unlock, mode selection can be made, when no operation 30S automatically
unlock, and long press mode button 0.5 seconds to unlock.
• Every change of time or mode, there will be a ‘beep’ sound. The curing light will keep the last program selected in memory
•
Put on the disposable curing light sleeve to cover the whole curing
light for cross-infection control. Then put on the light protective
shield and light head protective ring, the curing light is ready for use
• Remove and dispose of the curing light sleeves after every patient
• Curing light will automatically turn off if not in use for 1 minute
SPECIFICATION:
Power supply:Input: AC 100-240V, 50/60Hz
Output :DC 5V/1A
Intensity High:1800mw/cm2
Battery: 3.6V, 2600 mAh (9.36Wh)
Handpiece dimension: Φ3.0 cm x 24 cm .
Packing List:
Main unit of the LED x1
Protective light shield x1
Transformer (100 -240V) x1
USB Type-C Chrging line x1
Instruction manual x1
Parameter：
Wavelength：440-480nm
Light power：5W
Intensity：800-1400mw/cm²
Battery：Li-on 800mAh
Input voltage：AC100-240V, 50/60Hz 0.4A Max
Output voltage：DC 5V/1.5A
Net Weight：155g
Mode selection：P1, P2, P3
Solidification time：1S,3S,5S,10S,15S,20S
Features:
·Produce the maximum light intensity safely.
· A high intensity of 1400 mW/cm2.
· Offers extremely short curing times of no more than 3 seconds.
· Cordless, highly portable and light weight (only 155g).
· High-performance Li-ion battery technology.
· LED panel conveniently indicates a countdown curing time.
· Battery can be fully recharged in 90 minutes.
· Battery with protection against over-voltage, over-current and short circuit.
· 3 versatile curing modes for every indications.
· Automatic power off, low battery alert.
· Color : White .
Operation conditions:
1. Storage Condition: Temperature: +10℃+40℃
2. Humidity: 30%-75%
3. Atmospheric pressure: 70KPa-106Kpa
4. Environment Conditions: Not near from fire equipment or flammability material.
Packing list:
The host * 1
Metal lamp holder *1
The silicone base *1
Power adapter *1
Disposable protective sleeve *1
Shade plate *1
Product specification *1
LED 1S
Parameter：
Wavelength：420-480nm
Light power：15W high power blue light LED
Intensity：800-1500mw/cm²
Battery：1400mah
Adapter input：AC100-240V, 50/60Hz
Output voltage：DC 5V/1A
Mode selection：P1-High mode , P2-Pulse mode, P3-Norm mode
Solidification time：P1: 1S, 3S P2: 5S, 10S, 15S, 20S, 25S, 30S P3: 5S, 10S, 15S, 20S, 25S, 30S
Features:
Three working modes, can achieve 1S curing.
Constant light intensity. The solidification effect in not affected by the consumption of remaining power.
Large capacity battery. A full charge can be used for more than 400 times continuously under 10S working time mode.
Adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.
This product is used for dentistry. It has the function of accelerating the material of dental restoration curing.
Led curing light (dentistry) is mainly composed by led, light hood, charging cradle, battery, adapter, main unit.
By the mode adjustment into time adjustment, need to long press for 2 seconds. Mode conversion and time adjustment is only a short press.
Operation conditions:
Storage Condition: Temperature: +5℃ to +40℃
Humidity: 30%-75%
Atmospheric pressure: 70KPa-106Kpa
Environment Conditions: Not near from fire equipment or flammability material.
Packing list:
Metal lamp holder *1
Switch button *1
Display screen *1
Time/mode button *1
Charging base *1
Shade plate *1
Charger plug *1
Test card *1
LED Curing Light
Description：
1. LED Screen，high quality plastic handle.
2. Noiseless and no vibration when working
3. Lithium battery with large capacity
4. Three Modes: Gradually mode/Flashing mode/All light mode
5. Automatically power down: It will be turned automatically off automatically without pressing button for 3 minutes.
6. Solidification time is :40s. Every ten seconds, sound signal to remind operator. The length of work time can be controlled freely.
7. lt has self-protection against exceeding heat after continuous long time work that p o w e r – off by itself. After the temperature is normal, operator can use it again.
8. The LED is longevity. Cold light source, no fan. Avoid the infection, cause of air movement.
Features:
Packing Size: 210*148*71 mm(unit)
Packing weight: 420g
Wavelength: 440-480nm
Light Intensity: 5W≥1200mw/c㎡
Input Voltage: 100-240V 50-60HZ
Battery Capacity: DC3.7v 2200mAh
Solidification Effect:5s/3mm
Color available:
green/silver/blue/black/purple/Orangered/golden
Please email us or leave us message if you need different color in 2 working days,
Or we will send one as the picture show, thanks !
|
