This Kit features a 2.5 Horse Power Impeller, (1) Bearing and Seal that fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand and are found on Jacuzzi® Premium or Sundance® brand Hot Tubs only. The pumps this impeller fits usually have the part number 6500-352, 6500-365, 6500-367 And 6500-363 on the label.

Note: Normally you will have the WUA400-I or WUA400-II style part numbers along with 6500-352, 6500-365, 6500-367 or 6500-363 on the pump but if it is a Jacuzzi or Sundance most likely this is the correct impeller.. Another way you can tell which style you have is the spring part of the seal is on the back of the impeller on this style and the spring part is on the volute "back" of the other style... If you have the other style look for "Guangdong LX pump" in our store..

NOTE: IF YOUR PUMP HAS WUA400-I or WUA400-II and does not have a 6500 number this kit is NOT CORRECT.. Search our store for WUA400 and you will see the other style kit.. The spring part of the seal is on the back of the impeller in ththe Sundance Jacuzzi kit and the spring is on the volute is the normal style.. 

Search Youtube for our How To Video search for: LX Series Guangdong Pump WUA 200 300 400 How To Repair The Spa Guy

It is about 4 5/16" across the face edge to edge, it measures about 3 1/16" from the tip of the front to the tip of the sleeve in the back, it also measures 13/32" from the inside of the vane edge to edge. Some of these impellers have a number on them PPO 109 if yours does this is the correct impeller.. There is only one choice for the Jacuzzi Premium and Sundance pumps...  

NOTE: This Wet End looks a lot like an Aqua-Flo, Guangdong LX and a CMP Wet End but they do not interchange see the video for how to tell the difference! 

Note: This Impeller Fits Jacuzzi Premium or Sundance Brand Guangdong Chinese LX series Pumps only Some Pump Part numbers are as follows on the label: 6500-352, 6500-365, 6500-367 And 6500-363

To Install this Impeller you will have to remove the face plate and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. 

Note: We offer parts & kits for this wet end and complete pumps in our store.