Oil/Fuel/AirPressure Sensor / transducers are designed and manufactured using the most advanced technologies. They have been used in many different industries. This pressure sensor / transducer works at a variety of media, i.e. oil, air, water, etc. Unlike the resistance type sender, it is a sold state transducer with no moving parts, which does not allow for any opportunity for the sender to become worn out mechanically.

Used in various automotive applications and ECU like

-DTA

-Motec

-AIM

-Emerald

-Link

-Megasquirt

-Omex

-Ecumaster

-Zietronix

-Life Racing

We supply many motorsport teams and been commented of the reliability of the sensor unlike cheap imitation items.

Thread : 1/8NPT

0.5V = 0 psi

4.5V = 150 psi

Pinout:

A = Ground

B = +5 Volt

C = Signal Out

Accuracy: within 1.5% of reading (full scale). Current draw: less than 4 mA. Burst (over or max pressure) pressure: minimum 300 psi. Thread: 1/8”-27 NPT. (see our fitting set for other thread size below). Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included. Wiring: Red for +5V. Black for ground. Blue for signal output. Overload Capacity: 2-4 times; Working Temperature: -40ºC;+120ºC; Compensation Temperature: -20ºC;+80ºC; Protection Class: IP67; Pressure Medium: The gas and liquid which is compatible with 316L stainless steel. Package Includes: 1 x Pressure transducer ( With cable) Note: If you have any question, please contact us before leaving any feedback.