HEZOOMS 8k DisplayPort Splitter 1 in 3 Out 8K@30Hz 4K@120Hz DP 1.4 Splitter Triple MST SST Hub Adapter 1x3 Port for 1 DisplayPort Ultra HD Source to 3 HD Display Port


  • NEW 1x3 DisplayPort Splitter: Split one DP signal into 3 signals. Supports output of 3 same screens in SST mode or 3 different screens in MST mode. In MST expansion mode, the single port output can reach 8K@30Hz 4K@120Hz, and the three ports output can reach 4K@60Hz at the same time .MST mode of Apple system can only extend one screen (limited by iOS System) .Note :when using, please make sure to use USB cable to power the Splitter .The product does not include a power adapter, Bring your own.
  • This 1x3 DP splitter is compact and efficient. It allows you to distribute one HD source to three displays simultaneously. compatible with DP1.4DP1.3DP1.2DP1.0, Support 3D and 4K8K ultra HD. Please run it on the computer where the discrete graphics card is installed.It is recommended to use a GTX 20 series or higher, and the graphics card must support DSC. Note: The integrated graphics card is not compatible with the DP splitter due to insufficient video memory and bit width limitation.
  • Support operating system: Apple (iOS) system, Windows system, Android system.pls make sure that the DP soure has already implemented full support for MST/SST. Splitter Support SST (Mirror) and MST (Extended) mode ,Support HDR 4:4:4, 4:2:2, 4:2:0. DP cable direct connections are recommended for reliability and compatibility. this Displayport MST SST splitter does not work with any dock.The length of the DP cables connected to both ends of the Splitter should not exceed 3 meters respectively.
  • DisplayPort Splitter Specifications: Single port display(8K@ 30Hz 7680x4320 ) ,Single port display (4K@ 120Hz 3840x2160),1 to 3 operation supports 4K@60Hz image.Compatible resolution: 8K@30Hz 4K@120Hz, 60Hz 1440P@165Hz, 144Hz, 120Hz, 60Hz. 1080P@240Hz,165Hz, 144Hz,120Hz, 60Hz (Depends on your graphics card, monitor, operating system and DP cable support).If you output an 8K signal, we recommend using an DP 1.4 8K standard cable.
  • If you want to output 8K@30Hz, 4K@120Hz through DP splitter, please make sure your source device, your cable and monitor all support the resolution you need to output, and output under a single port. Note:When the DP splitter is connected to the power supply, the LED will not light up. This is a normal phenomenon. The splitter is not damaged. The LED will only light up when it is connected to the computer host and monitor, and the signal is detected at the same time.