1. DC Plug the power adapter into the external socket to connect the power;

2. Green light is shining after the power supply the default temperature of 40 ℃;

3. One key operation, three temperature precise adjustable:

4. When the green light is standing, the temperature is 40 ℃;

5. Once again the key shows the yellow light shining, and the representative continues to heat until the yellow light is often bright and the temperature is 45 ℃;

6. Once again the key shows the red light shining, and the representative.

continues to heat until the red light is often bright and the temperature is 50℃

Temperature	Light color	Heating	Reached the preset temperature
40	Green	Shiny Green LED	Green LED often bright
45	Yellow	Shiny Yellow LED	Yellow LED often bright
50	Red	Shiny Red LED	Red LED often bright

Notice:

Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;

The light slowly flashes when cooling down.

Cleaning and disinfection

All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.

Not 135℃ sterilization.

Technical parameters

power adapter

Input : 100-240V AC 50/60Hz

Output : 12V 3A

  

Description of product:
1.1   Heater designed for heating composite resin material,improve the flow of its adhesive properties;At the same time it can also be used to heat adhesive when used manual equipment.
Heater use the precision circuit control module to heat,control the temperature tolerance within 1 degree,According to your choice of material and it can set any integer  temperatue within 40-70℃

1.2  Some materials and recommended temperatue

No.	Material	Recommended temperatue(℃)
1	Resin(for filling)	39
2	Resin(for bonding)	55
3	Branscan	38
4	Agar film	Melting 99；Insulation 60
5	Sodium hypochlorite	60

Operation:
2.1  After plug the power supply,the digital tube is always on ” -- ℃ ”

2.2  After plug the power supply,single press “ ON/OFF/SET ”

Heater goes into the heating state according to the set temperatue at previous power-off

.It automatically stops heating after reaching preset temperatue.

2.3  After plug the power supply,single press “ + ” or “ - ” into the setup mode.Press  “ + ” can increase the preset temperatue.Press  “ - ” can decrease the preset temperatue.After setting,single press “ ON/OFF/SET ” into the heating state.It automatically stops heating after reaching preset temperatue.

Technical parameter:

3.1  Power adapter：

Input：AC100-240V 50/60Hz

Output：DC15V2A

3.2  Heating temperatue range:40℃-70℃，±1℃

Package List:
1 * AR Heater
1 * Plug
1 * User Manual

FDA Statement

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

Seller name:Dentaljoy

City,State:SHENZHEN,China

Telephone number:0755-67530378