![Official PayPal Seal](https://www.paypal.com/en_US/i/icon/verification_seal.gif)
brake perch bracket and lever
shorty GP lever
the lever is 5" long
five inches in length.
Brand new, perfect for
honda CB's SL's CL's
with drum brakes.
no provision for brake light switch
here's a note on installation:
you only want to tighten your perch mounted controls, clutch
perch/lever, brake lever/master cylinder
just tight enough so that they don't
move during normal use, but are loose enough that
you can rotate them on the
bars if you use both hands to apply force. This allows for
some forgiveness
and if you are lucky, the whole perch will move, instead of simply
breaking
as will happen every time on a rigidly mounted setup.
(especially
on a dirt bike, or enduro, which are more likely to have tip overs and
crashes)
street bikes usually break levers even if you set them up loose, but
i have gotten lucky before.
a confusing thing is that on Honda bikes,
many clamps like the bar
clamps, lower fork leg caps,
master cylinder clamps are all directional,
meaning one side of the clamp
is longer than the other, usually marked with
an arrow or a dot.
The long side is supposed to beon the top or forward,
and the correct procedure is:
you tighten it (the longer top/forward end) all the
way,
then tighten the back or bottom bolt last.
I have seen guys try
to do that with these aftermarket clamps,
and it just breaks them off,
because one end is NOT longer,
like on the quality OEM parts.
These
need to be tightened SLOWLY and EVENLY!
and DO NOT OVERTIGHTEN!
you
should be able to move them on the bar with some force,
so they will rotate,
and not break in the event of a minor spill / tip over.
also just the perch:
221230598627
I also have matching
clutch assemblies
see ebay #:
230903028366
also with the vintage slim lever: 221178461649
Aluminum - Not plastic.
8mm opening in the adjuster, to accept the metal cable end.
super clean- no mirror mount.
perfect for cafe's and bobbers,
~ any custom drum setup.
made for 7/8" bars -Universal fit
Innovative,two-piece mount
means you don't have to remove
your grips or switch housing!
SWEET!!!!!!!!!!!!!!!!!!
again please NOTE:
NO Mirror mount
If you need a master cylinder, see:
ebay items:
230840027094
230816517066
Contact me with any
problems.
Buyer to pay initial shipping
cost as well as return shipping if returned.
Please contact me
before leaving neutral or negative feedback!
I have a 100% feedback rating
and i intend to keep it that way!
as always, ask questions first before
buying! thanks for your cooperation!
I do warranty the product for 14 days-
if returned, buyer will pay the
original shipping cost, as well as return shipping
costs.
Product Description
| This item fits the following models: 1970-1972 Honda CB100 Super Sport1973-1978 Honda CB125S1969-1973 Honda CB175 Super Sport1974-1976 Honda CB2001972-1974 Honda CB350F1974 Honda CB3601978-1979 Honda CB400TI Hawk I1968-1969 Honda CB450K1976-1977 Honda CJ3601970-1973 Honda CL100/S Scrambler1973-1974 Honda CL125 Scrambler1968-1972 Honda CL175 Scrambler1968-1973 Honda CL350 Scrambler1969-1972 Honda CL450K Scrambler1974 Honda CL450K Scrambler1978-1979 Honda CM185T Twinstar1980 Honda CM200T Twinstar1974-1978 Honda CR125M1973-1976 Honda CR250M1978-1980 Honda CR250R1980-1981 Honda CR80R1977 Honda CT1251972-1974 Honda CT701969-1979 Honda CT901975-1977 Honda MR1751976 Honda MR2501974-1976 Honda MT1251974-1976 Honda MT2501970-1973 Honda SL1001971-1973 Honda SL1251970-1971 Honda SL1751972 Honda SL3501973 Honda SL701973 Honda ST901976 Honda TL1251975-1976 Honda TL2501974-1978 Honda XL1001981-1984 Honda XL100S1974-1978 Honda XL1251979 Honda XL125S1974-1978 Honda XL1751979 Honda XL185S1972-1976 Honda XL2501978-1979 Honda XL250S1974-1978 Honda XL3501974-1976 Honda XL701977-1979 Honda XL751980-1984 Honda XL80S |
fits:
-
SL70 1971-1972
XL70 1974-1976
XL75 1977-1979
XR75 1972-1978
XL80S 1980-1985
XR80 1979-1984
SL90 1969
SL100 1970-1972
XL100 1974-1978
XL100S 1979
XL100S 1981-1984
XR100 1981-1984
CR125M 1974-1978
CR125R 1979-1980
CT125 1977
MT125 1974-1976
MT125R 1977-1978
- SL125 1971-1973
- XL125 1974-1978
- XL125S 1979
- MR175 1975-1977
- SL175 1970-1972
- XL175 1973-1978
- XL185S 1979
- XR185 1979
- CR250M 1973-1976
- CR250R 1978-1980
- MR250 1986
- MT250 1974-1976
- TL250 1975-1976
- XL250 1972-1976
- XL250S 1978-1979
- XR250 1979
- SL350 1969-1973
- XL350 1974-1978
- XR500 1979
also fits these models if they have a drum front brake: SL70 71-73, XL70 74-76, XL75 77-79, XR75 73-78, CR80
80-81, XL80 80-85,
XR80 79-84, XL100 74-85, XR100 81-84, CB125 79, 82, CL125
67-69, 73-74,
CR125 74-80, CT125 77, MT125 77-78, SL125 71-73, TL 125 73-76,
XL125 74-84,
CL 175 68-73, MR175 75-77, SL175 70-72, XL175 73-78, CM185 78-79,
XL185 79-83,
CL200 74, CM200 80-82, CM250 82-83, CR250 74-80, MR250 74-76, TL250
75-76,
XL250 72-76, 78-81, XR250 79, XL350 76-78, CB360 74, CJ360 74-77, CB400
80-81,
CM400 79-81, CB450 68-69, CB450 Nighthawk 82-86, CL450 67-74, CM450
82-83,
CX500 79-81, XL500 79-81, XR500 79
-------------------------------------------------------------------------------------------------------------------------------
ACTUAL EBAY FEEDBACK:
HONDA DRUM Brake Lever Assembly CB200 CB350 CB360 CB450 CB CL SL shorty ALLOY
fast shipping, nice product, would deal with again Thanks!!!!
| Buyer: | During past month |
| HONDA DRUM Brake Lever Assembly CB200 CB350 CB360 CB450 CB CL SL shorty |
Excellent International ebay seller fast & efficient service many thanks. | Buyer: | During past month |
| HONDA DRUM Brake Lever Assembly CB200 CB350 CB360 CB450 CB CL SL Dirt and Street |
Good product, good price. Fast shipping, well packaged. Just what I needed. | Buyer: | Past 1 month |
| HONDA DRUM Brake Lever Assembly CB200 CB350 CB360 CB450 CB CL SL Dirt and Street |
Lightning quick delivery and awesome customer service! | Buyer: | May-21-14 18:09 |
| HONDA CB Clutch Lever assembly Satin Black CB750 CB550 CB 550 500 450 350 200 |