40W Fixed Focus 45mm Laser Module with Air AssistBy LASER TREE
Product Description
LT-40W-AA, as a 40W laser module with air assist, can effectively get clean-cut edges, improve cutting performance and increase the service life of lens.
Product Features:
1.Beam compression technology, 5W optical power laser module
2.Excellent Cutting Ability: Cutting 4mm thick plywood by one pass at a Speed of 190mm/s.
3.Very Fast Engraving Speed: 45mm focal length, engrave 304 stainless steel at speeds up to 6000mm/min.
4.Magnetic eye protective cover: Eye protection and easy disassembly.
5.Can be installed on Ato**tack, ZBAIT*, Ortu*, Two Tr**s and other models of DIY laser engraving machines.
For various 12V 3PIN laser engraving machines, plug and play. For 12V 4PIN machines, just use the driver adapter to connect.
Specification:
Output optical power: 5W
Material: aluminum alloy + plastic
Light color: blue
Wavelength: 450nm
Spot form: Punctiform, fixed focus
Input voltage: 12V 1.8A(1.5A-2A)
Interface: XH2.54-3PIN socket
Modulation: 0/3-12V 0-5kHz TTL/PWM (0V off, 3-12V on)
Item size: 40*40*141.4mm
Product weight: 255g
More Precise with 5W Compressed Spot
Professional Air AssistAir tube outer diameter: 8 mm; inner diameter: 6 mm
Powerful High Speed Air AssistGet clean-cut edges and improve lens life and module cutting performance
Reference Settings for CuttingFor cutting, the ideal position of the focal point is in the middle of the material, the focal length of LT-40W-AA is 45mm, the length of the air nozzle is 38mm, so the focal point position is 7mm(45-38mm) below the air nozzle.
Cut 4mm plywood, the distance from the air nozzle to the surface of the material should be 7mm-4mm/2=5mm.
Put a 5mm thick focus fixing plate between the nozzle and the board for the best cutting point.
Reference Settings for EngravingFor engraving, the focal point is at the surface of the material, the focal length of LT-40W-AA is 45mm, the length of the air nozzle is 38mm, so the focal point position is 7mm(45-38mm) below the air nozzle.
Put a 7mm thick focus fixing plate between the nozzle and the board for the best engraving point.
Widely Compatible DesignCan be installed on Ato**tack, ZBAIT*, Ortu*, Two Tr**s and other models of DIY laser engraving machines
40W Fixed Focus 23mm Laser Engraving HeadBy LASER TREEProduct DescriptionUpgraded Laser Module, LASER TREE 23mm Fixed Focus Balance Engraving and Cutting Head, Laser Engraver Module 5W Optical Power with Metal Wind Gathering Hood, Suitable for Laser Engraver Machine
Product Features:
1.Engraving Mirror Stainless Steel, no need to Paint Black.
2.Very Fast Engraving Speed: 23mm focal length, engrave 304 stainless steel at speeds up to 800mm/min.
3.Excellent Cutting Ability: Cutting 4mm thick plywood by one pass at a Speed of 80-100mm/s.
4.Magnetic eye protective cover: It allows you to see the laser module in action without the need for eye protection and is easy to disassemble without screws.
5.Metal cutting air outlet: Which does not generate heat and can resist flames.
Specification:
Material: Aluminum alloy
Effect Output Power: 40W
Output Optical Power: 5W
Electric Power: 12V 1.8A(1.5A-2A)
Focus Length: 23mm
Interface: XH2.54-3P socket
Power Adjustable: Support 5V PWM modulation
Function: Engraving/Cutting
Module Size: 40*40*121mm
Module Weight: 240g
Metal Wind Gathering Hood
Prevent flames from burning
Magnetic Eye Protection Cover
Watch laser engraving without wearing goggles
Beam Compressed Spot
More Precise with 5W Compressed Spot
Extreme Engraving
Ultra-fast engraving on stainless steel- 800mm/min
Reference Setting for Engraving
Easily create more fabulous works
Ultimate detail design makes your creation easier
Various Available Materials