Carbon Cleaning Machine
Send us a message to buy this product with 5% discount.
Our device is a full digital control produced with the latest technology.
Gas production can be adjusted up to 120 liters per hour.
It can be used in all vehicles up to 8,000 cc.
0-40a ampere adjustment
Digital ammeter with display
The water level is easily visible from the front bar.
Electric cable 2 meters
Gas hose 3 meters
Device box is 316L quality stainless material.
Device box paint is electrostatic powder coated oven paint.
Carbon cleaning can be used to make hydrogen source outside.
Water storage capacity 1 liters
Device weight 4 kilograms
Working voltage: 110 / 220v AC volts
With carbon clean; The ignition system in your vehicle, cylinders, valves, and carbon (soot) in the exhaust system are cleaned with sticky and harmful deposits, and your engine will achieve its first day's performance.
WHAT DOES CARBON DUCT CREATING PROBLEMS IN THE VEHICLES?
* Decrease in cylinder compressions.
* Reduction of engine power.
* Excess fuel consumption.
* Bad idle.
* Reduction of acceleration capability.
* Difficult operation in cold weather.
* Operation of the engine by shaking.
FUNCTION:
* Ignition system, engine interior, valve and piston surfaces, and exhaust system is cleaned.
RESULTS:
* Fuel saving up to 15% on very dirty engines is about 3-5% on average.
* Increases engine performance. It is normal for diesel engines to increase power by 10% and some measurements by 30%. The first operation difficulty before cleaning in gasoline engines,
misfire, hard work at low speed and similar complaints are eliminated.
* Decreased harmful exhaust emissions, gasoline engines, over 40%, diesel engines, 75% of the values have been determined.
What is Carbon Engine Cleaning ?
In just 30-60 minutes, your engine will run like new.
Our Carbon Cleaning machines have a remarkable cleaning capacity. With this advanced technology, developed over several years, hydrogen is passed through the air intake pipes, burning off up to 85% of the carbon deposits that prevent your engine from running smoothly.
How does it work?
Our Carbon Cleaning Machines are really easy to use and arefast, efficient, and completely autonomous. You simply place the feed pipe into the air intake and allow the cleaner to do its work.
All of our machines automatically manage pulsed hydrogen flow based on pressure vs flow.
The heating effect of hydrogen raises the combustion temperature to cause the reactions needed for the hydrogen cleaning process to begin, essentially a chemical reaction that serves to remove, burn off, disintegrate, and eliminate carbon deposits. To install, simply insert the hose of the Carbon Cleaner into the air intake duct and then switch the power on. By usingthe timer, you have the ability to measure the duration of the cleaning, which varies according to the capacity of the motor being cleaned. While the machine is operating you must allow the vehicle to idle.
The benefits of hydrogen in the combustion process
Hydrogen is characterized by a high reactivity and a combustion rate as much as five times greater than that of fuel. Moreover, hydrogen has a wider flammability range than other types of fuel. Due to these characteristics, the addition of even a small amount of hydrogen in the fuel-air mixture increases the combustion rate thus making the combustion more stable by reducing the duration of combustion and reducing cycle-to-cycle variations.
Many quantitative and experimental studies done on the impact of adding hydrogen in internal combustion engines (based on gas or diesel) have come to the common conclusion that the use directly:
– reduces the duration of the combustion process
– increases thermal efficiency
– burns off, disintegrates, and removes carbon deposits
And finally, for best results, we recommend you go for a 25 to 30-minute drive in low gear (above 3000 r/min) after the Carbon Cleaning session in order to remove the last remaining residue from the exhaust.
The Carbon Cleaning ?
Helps prevents running issues on engine problems.
Preventive engine cleaning enables you to restore engine parts rather than replacing them, thereby saving vehicle owners on costly parts.
These problems result mainly from poor combustion, which stifles the engine.
So before replacing your engine parts, try Carbon Cleaning. A dirty engine as the result of carbon deposits is a huge threat to vehicle performance.
Application:
30,000 km. Application is started on vehicles.
* Gasoline vehicles every 10,000 km. is also repeated.
* Every 15,000 km on diesel vehicles. is also repeated.
Hydrogen gas is supplied to the vehicle through the air filter and the vehicle is operated at idle for 45 minutes. It is operated at 3000 - 5000 rpm by pressing the gas for 5 seconds in 5 minutes.
CARBON CLEAN WITH İLE FUEL POWER IN FUEL
ELECTRONIC GAS OUTPUT ADJUSTABLE FOR 100-8000 CC TOOLS
WHEELED EASY PORTABLE BOX
WORKING WITH 12 DC VOLT ELECTRIC
DESIGN SUITABLE FOR CONTINUOUS USE.
Attention: Due to the high demand, we can make the product cargo after 10-12 days. Please send message with different color requests.
Shipping: The product is shipped by express shipping. The average time to reach is 5-7 days.
Customs procedures are the buyer responsibility.
Set contents:
Carbon Cleaning Machina
3 meter gas hose
English User Guide