•  
  • The suspension on the advertised compatible vehicles requires a spacer that is not a 1:1 ratio; therefore the stated (lift) height is achieved after install, not the height of the spacer itself. For Example, a 1" to 1.4" thick spacer (depending on the application) will provide 2" of lift.
  •  
  • Application
  •  
  • 3" Front 2" Rear Leveling Kit Differential Drop For Toyota Tacoma 4WD 2005-2022

     

    The suspension on the advertised compatible vehicles requires a spacer that is not a 1:1 ratio; therefore the stated (lift) height is achieved after install, not the height of the spacer itself. For Example, a 1" to 1.4" thick spacer (depending on the application) will provide 2" of lift.

     

    Application

     

    • Fits Toyota Tacoma 2005-2022 2WD 4WD (6 lugs only)
    • Not Fit 5-lug Model/ 2019 TRD PRO Model
    • Diff Drop Not Recommended For TRD RRO Models
    • 2016+ Tacoma TRD Models require upgrade control arms to accommodate the 3" lift spacer. Will not fit or work properly without the control arm upgrade. Only lift up to 2.5" will work without the upgraded control arm.
    • An alignment is always recommended after altering the height of your vehicle.

     

    What is a leveling kit?


    If you own a truck, you’ve probably noticed that the rear of the truck sits higher than the front. As a truck is built to haul heavy loads in the bed, the additional height in the rear is intentional so the truck doesn’t sag when extra weight is added. However, when you’re not hauling something, it might not be the most visually appealing. One easy way that you can fix this is with a leveling kit. A leveling kit allows you to raise the front of the truck a few inches to match with the back. 
    While this is mainly for looks, it can give you a little bit of added ground clearance. Most leveling kits will only provide an inch or two of lift. Depending on the leveling kit, you may be able to install a slightly larger tire as well. Leveling kits are easier to install than a full-on suspension lift kit, with most featuring bolt-on installation. Depending on the leveling kit, strut disassembly may be required for installation. Leveling kits can include several components such as spacers, strut extensions, shocks, and lift blocks. Most leveling kits will help you maintain the factory ride quality while leveling out your rig, all for an affordable price. For less than a few hundred dollars, you can level out your ride and give your truck or Jeep a better-looking stance at the same time.

     

    How do I determine which kit I need to level my vehicle?

     

    The ride height of each vehicle varies due to the condition and trim model of the vehicle. The most optimal way to determine which kit you require to level your truck is to park your vehicle on a level ground and take a tape-measure to measure the distance from the ground to the top center of the fender arch. Take the measurements for both the rear and front and then subtract the two numbers. This is about the amount you will need in order to perfectly level your vehicle.

     

     

    Here's the proper way to measure your vehicle's ride height before attempting any leveling lift kit install.


    Before lifting your vehicle with leveling kit, it’s important to begin by properly measuring its ride height. By doing so, you’ll be able to see and document the amount of actual lift you’ve attained. Then you can take that information and determine the correct size and diameter of wheel you can use with the vehicle’s new ride height. Here’s the proper way to measure:

     

    1) Select a clean, dry and level surface to take the vehicle’s ride height measurements
    2) Drive the vehicle forward at least 10-feet onto the level surface to settle the suspension. 
    3) Park the vehicle and wedge or block to secure the tires so that the vehicle will not roll forward or back.
    4) Take a measuring tape and measure the ride height from the center of the axle or hug, straight up (vertical) to the bottom of the fender lip. 
    5) Repeat the process for all four sides and record the measurements. 

     

    Once this is done, you’ve recorded the proper ride height measurement of your truck, SUV or Jeep. After you’re lift has been installed, take these measurements again and see the total amount of actual ride height you’ve gained.

     



    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.
    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Contact Us
    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Shop Category
    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    3" Front 2" Rear Leveling Kit Differential Drop For Toyota Tacoma 4WD 2005-2022

     

    The suspension on the advertised compatible vehicles requires a spacer that is not a 1:1 ratio; therefore the stated (lift) height is achieved after install, not the height of the spacer itself. For Example, a 1" to 1.4" thick spacer (depending on the application) will provide 2" of lift.

     

    Application

     

    • Fits Toyota Tacoma 2005-2022 2WD 4WD (6 lugs only)
    • Not Fit 5-lug Model/ 2019 TRD PRO Model
    • Diff Drop Not Recommended For TRD RRO Models
    • 2016+ Tacoma TRD Models require upgrade control arms to accommodate the 3" lift spacer. Will not fit or work properly without the control arm upgrade. Only lift up to 2.5" will work without the upgraded control arm.
    • An alignment is always recommended after altering the height of your vehicle.

     

    What is a leveling kit?


    If you own a truck, you’ve probably noticed that the rear of the truck sits higher than the front. As a truck is built to haul heavy loads in the bed, the additional height in the rear is intentional so the truck doesn’t sag when extra weight is added. However, when you’re not hauling something, it might not be the most visually appealing. One easy way that you can fix this is with a leveling kit. A leveling kit allows you to raise the front of the truck a few inches to match with the back. 
    While this is mainly for looks, it can give you a little bit of added ground clearance. Most leveling kits will only provide an inch or two of lift. Depending on the leveling kit, you may be able to install a slightly larger tire as well. Leveling kits are easier to install than a full-on suspension lift kit, with most featuring bolt-on installation. Depending on the leveling kit, strut disassembly may be required for installation. Leveling kits can include several components such as spacers, strut extensions, shocks, and lift blocks. Most leveling kits will help you maintain the factory ride quality while leveling out your rig, all for an affordable price. For less than a few hundred dollars, you can level out your ride and give your truck or Jeep a better-looking stance at the same time.

     

    How do I determine which kit I need to level my vehicle?

     

    The ride height of each vehicle varies due to the condition and trim model of the vehicle. The most optimal way to determine which kit you require to level your truck is to park your vehicle on a level ground and take a tape-measure to measure the distance from the ground to the top center of the fender arch. Take the measurements for both the rear and front and then subtract the two numbers. This is about the amount you will need in order to perfectly level your vehicle.

     

     

    Here's the proper way to measure your vehicle's ride height before attempting any leveling lift kit install.


    Before lifting your vehicle with leveling kit, it’s important to begin by properly measuring its ride height. By doing so, you’ll be able to see and document the amount of actual lift you’ve attained. Then you can take that information and determine the correct size and diameter of wheel you can use with the vehicle’s new ride height. Here’s the proper way to measure:

     

    1) Select a clean, dry and level surface to take the vehicle’s ride height measurements
    2) Drive the vehicle forward at least 10-feet onto the level surface to settle the suspension. 
    3) Park the vehicle and wedge or block to secure the tires so that the vehicle will not roll forward or back.
    4) Take a measuring tape and measure the ride height from the center of the axle or hug, straight up (vertical) to the bottom of the fender lip. 
    5) Repeat the process for all four sides and record the measurements. 

     

    Once this is done, you’ve recorded the proper ride height measurement of your truck, SUV or Jeep. After you’re lift has been installed, take these measurements again and see the total amount of actual ride height you’ve gained.

     



    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Copyright of Auto_EngineParts. All rights reserved.