5 PCS 8MB Recordable Sound Module MP3 Music Box Voice Player Programmable Board
5 PCS 8MB Recordable Sound Chip Module MP3 Music Box Voice Player Programmable Board DIY Card Gift
Description:
Power Supply Voltage: 4.5-5V or 3.7V lithium battery
RAM: 8M
Output: 0.5-1W
Control mode: button / TTL
Board Size: 30*30mm
Speaker Size: D36mm
Power Supply Voltage: 4.5-5V or 3.7V lithium battery
RAM: 8M
Output: 0.5-1W
Control mode: button / TTL
Board Size: 30*30mm
Speaker Size: D36mm
Features:
PERFECT CREATIVE GIFT: It is ideal to make a DIY music box, musical greeting cards, photo frames, album, gift box and the other creative gifts for Mother's Day, Valentine's Day, Christmas.
PERFECT CREATIVE GIFT: It is ideal to make a DIY music box, musical greeting cards, photo frames, album, gift box and the other creative gifts for Mother's Day, Valentine's Day, Christmas.
8M MEMORY: Connect with your computer by a micro USB data cable. It is recognized by computer as a USB drive, just like a MP3 player, and you're free to add any MP3/WAV audio file to the internal 8M storage.
EASY TO PLAY WITH BUTTON: Install it in your project/gift, and then push the button. Your music which you put in it will be played once and automatically stop when the song finishes.
PROGRAMMABLE SOUND MODULE: Provide more possibilities to develop a module completely fit for your own project. You can select different trigger mode (button/TTL trigger) by connecting with different soldering pads.
Control mode (Pictured)
In the table,‘0' means having 3.3K resistor; '1' means without 3.3K resistor.
You can see that there are 3 resistors on the board, so the default mode is 000 (It will play the music once you press the button. If you press the button again during playing, it will stop immediately)
You can change to other mode by removing the resistor on the board. For example, if you want to set 001 (Under this mode, you need to hold down the button to play the music. It will stop once you release the button.), you need to remove the third resistor that marked C on the board. To remove the resistor, you need a soldering iron to melt the solder and take the resistor away. It is a little difficult if you are not good at soldering so we recommend you to use 000 default mode.
You can see that there are 3 resistors on the board, so the default mode is 000 (It will play the music once you press the button. If you press the button again during playing, it will stop immediately)
You can change to other mode by removing the resistor on the board. For example, if you want to set 001 (Under this mode, you need to hold down the button to play the music. It will stop once you release the button.), you need to remove the third resistor that marked C on the board. To remove the resistor, you need a soldering iron to melt the solder and take the resistor away. It is a little difficult if you are not good at soldering so we recommend you to use 000 default mode.
Power-ON-Play mode
It will enter Power-ON-Play mode if short circuit between two pads of button. That is to say, it will play voice immediately when power on.
Instructions
① Connect 4.5V~5V non-rechargeable battery power;
② Press the button, and you will hear a test music which is a Chinese song. Press the button during playback, then it will stop playing immediately.
③ Connect the module to computer by USB cable; SUPPORT WINDOWS ONLY
④ It is recognized by computer as a USB drive, just like a MP3 player, and you're free to add any MP3/WAV audio file to the internal storage as long as it doesn't go over the 8MB limit;
⑤ Do not forget to delete the default audio file;
⑥ Repeat Step 2 to see if the module work well. Adjust the volume to a suitable degree.
Package included:
5 X 8MB Sound Recording Module
① Connect 4.5V~5V non-rechargeable battery power;
② Press the button, and you will hear a test music which is a Chinese song. Press the button during playback, then it will stop playing immediately.
③ Connect the module to computer by USB cable; SUPPORT WINDOWS ONLY
④ It is recognized by computer as a USB drive, just like a MP3 player, and you're free to add any MP3/WAV audio file to the internal storage as long as it doesn't go over the 8MB limit;
⑤ Do not forget to delete the default audio file;
⑥ Repeat Step 2 to see if the module work well. Adjust the volume to a suitable degree.
Package included:
5 X 8MB Sound Recording Module
We accept bulk order,dropshipping and customized product
See more in the flyfuntech2022
