|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Environment Protection:
Convert heat energy into electric energy, drive the wood stove fan heat powered to rotate, blow the hot air above the fireplace to the living area, and increase the air circulation in the house; Battery free, safe and environmentally friendly
High Quality:
The wood stove fan non electric support is made of aviation aluminum, and its surface is anodized to withstand high temperature.
The heat generated fireplace fan will not deform or change color when working at high temperature for a long time;
Operating temperature 60 ℃ - 350 ℃
Safety Control:
The wood stove fan blower base is equipped with bimetallic safety device. If the surface temperature exceeds 250 ° C, the safety device will gently lift the front of the wood fireplace fan to protect TEG and motor
New Design:
The latest upgraded technology of the heat powered fireplace fan, faster start-up, greater air volume, less noise, and the noise is less than 25dB
Package Size:
Fireplace fan size 4.2*5.2*8.5 in,
1.94 pound;
Airflow: 180-250 CFM (cubic feet per minute).
The maximum wind speed the heat powered wood stove fan can reach 0.8m per second.
Suitable for wood / gas / particulate fuel furnaces
Matters needing attention:
1. Please read the user manual before using the non electric fireplace fan
2. Always use the heat powered wood stove fan on the package
3. Before using the gas log fireplace fan, please check whether the heat powered wood stove fan is damaged. If the it is damaged during transportation, please do not use or install the stove fireplace fan
4. Keep children away from the wood stove fan when the fan works normally
5. Do not touch any part of the heat powered fireplace fan when working. If you want to move or carry the wood stove fan, please move it after the fan stops working and cools down
6. When the temperature exceeds 250 ℃, the bimetallic insulation device at the bottom of the non electric fireplace fan will automatically bend and tilt backward for protection
7. This powered stove fan cannot be burned on an open fire, nor is it used for built-in furnaces or other furnaces with insulated top design. Use this stove fireplace fan with a stand-alone furnace, or place the furnace fan on the smooth flat surface of the furnace top, close to the side or back of the chimney
8. The furnace fan is designed for an independent stove, and the furnace surface temperature is between (80 ℃ - 400 ℃). Temperatures above this range may damage the heat powered stove fan and generator set and invalidate your warranty
Item Specifics | |
---|---|
Brand : | Unbranded |
MPN : | Does Not Apply |
Fan Size : | 4.2*5.2*8.5 in |
Airflow : | 180-250CFM |
Operating temperature : | 60 ℃ - 350 ℃ |
Type : | Fan |
Feature : | ESCP |
Payment:
Shipping:
Returns:
Customer Services:
Ending Soon!!! Store Category |
8 Blades Heat Powered Wood Stove Fan Fireplace Fan Hot Air Circulation Silent
Environment Protection: Payment
Payment:
Shipping
Shipping:
Returns
Returns:
Customer Services
Customer Services:
|