Overview:
This is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
 
NOTE 1: This is a wide voltage Hybrid inverter. Solar panel input voltage must be higher 150V so that can start up the inverter to work.and cannot be lower than 120V during use.And each parallel model must use a set of PV boards separately to ensure that the voltage is greater than 150V (PV boards are recommended to be connected in series)NOTE 2: This Hybrid Inverter supports the WIFI function,but need to buy the WIFI module connect to APP so that can monitor. NOTE 3: If choose with Parallel function model, the parallel kit already built in inside, don't need you to buy and install separately.NOTE 4:The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
 
Features:
** 5500W 230VAC 48V Battery Charger Hybrid Inverter.
** Inverter running without battery.
** Built-in MPPT 80A solar controller.

** up to 9 units Parallel
1. Pure sine wave inverter.
2. Built-in MPPT solar controller.
3. Configurable input voltage range for home appliances and personal computers via LCD setting.
4. Configurable battery charging current based on applications via LCD setting.
5. Configurable AC/Solar Charger priority via LCD setting.
6. Compatible to mains voltage or generator power.
7. Auto restart while AC is recovering.
8. Overload/ Over temperature/ short circuit protection.
9. Smart battery charger design for optimized battery performance.
10. Cold start function.
 
Basic System Architecture:
The following illustration shows basic application for this inverter/charger. It also includes following devices to have a complete running system:
Generator or Utility.
PV modules (option)
Consult with your system integrator for other possible system architectures depending on your requirements. This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

Specification:
INVERTER MODEL: 1.5KVA, 3.5KVA, 5.5KVA
Input Voltage Waveform: Sinusoidal (utility or generator)
Nominal Input Voltage: 230Vac
Low Loss Voltage: 170Vac±7V (UPS);   90Vac±7V (Appliances)
Low Loss Return Voltage: 180Vac±7V (UPS);   100Vac±7V (Appliances)
High Loss Voltage: 280Vac±7V
High Loss Return Voltage: 270Vac±7V
Max AC Input Voltage: 300Vac
Nominal Input Frequency: 50Hz / 60Hz (Auto detection)
Low Loss Frequency: 40±1Hz
Low Loss Return Frequency: 42±1Hz
High Loss Frequency: 65±1Hz
High Loss Return Frequency: 63±1Hz
Output Short Circuit Protection: Line mode: Circuit Breaker; Battery mode: Electronic Circuits
Efficiency (Line Mode): >95% ( Rated R load, battery full charged )
Parallel Capability: Yes, up to 9 units
Note: For more information on parallel function, split-phase and 3-phase, PLS contact us for a manual.

Package include:
5500W 230VAC 48V Battery Charger Hybrid Inverter