For newcomers, this is the most common problem. Do not worry, you can solve it easily. Generally, the distance between the nozzle and platform is too far or near. So rotary the knob under the platform to adjust the distance between the nozzle and platform again, at a piece of A4 paper distance or less).
This happens for the following reasons: 1. Thermistor port of nozzle is not plugged into the motherboard above or poor contact; 2. The Thermistor port of the nozzle is broken, you need to replace the spare thermistor.
This happens for the following reasons:
1.Thermistor port of nozzle screw is locked tightly, cause the temperature can not be sensing;
2.Thermistor port of the nozzle is broken, you need to replace the spare thermistor.
Please check axis lines and limit lines whether the one-to-one correspondence, whether loose. When you check the extruder motor, you must preheat the nozzle over 185℃.
If the X/Y belt is loose, you can find circles that are not round, Lines not touching when printing. Tighten all belts as far as possible.
No, Ender 3 is a semi-assembly machine. You can refer to our packing instructions for assembly. Its installation is quite simple.
The specific installation time depends on the user's familiarity with the product. If you are familiar with the product and can fully understand the installation instructions, it will take about 30 minutes. If you don't know much about a 3D printer, it takes about two or three hours.
PLA,PETG,ABS
Step 1:Adjust the nozzle temperature to the consumable melting temperature and remove the consumables to be replaced.
Step 2:Push the new filament along until you feel firm resistance. This means it has reached the nozzle.
Step 1:Set the heating temperature, eliminate old consumables, and make new prints.
COMPANY:
Comgrow 3D Technology Co., Limited
Unit 1307 Beverley Commercial Centre
87-105 Chatham Road
South Tsim Sha Tsui Kowloon, Hongkong
FACTORY:
Unit-1: Jincheng garden, Dalang road, Longhua new district, Room 1202, Building 3, Shenzhen, Guangdong, China
Unit-2: Jincheng garden, Dalang road, Longhua new district, Room 1101, Building 3, Shenzhen, Guangdong, China
Features | Adjustable Layer Thickness, Adjustable Print Speed, DIY Kit, Heated Build Plate, On-Printer Controls, open source |
---|---|
Manufacturer Warranty | 1 year |
Custom Bundle | No |
MPN | Does not apply |
Scanning Resolution | 200x300 DPI |
Item Width | 382mm |
Interface | USB 2.0 |
Memory | 8 MB |
Max Hot bed Temperature | 110℃ |
Max. Printing Height | 250mm |
Printing accuracy | ±0.1mm |
Modified Item | No |
Item Length | 530mm |
Item Height | 200mm |
Nozzle Size | 0.4mm |
Country/Region of Manufacture | China |
Filament | 1.75mm PLA |
Max Nozzle Temperature | 255℃ |
Maximum Print Size | 220X220X250mm |
Output Type | Color |
Printing Speed | ≤180mm/s,normal 30-60mm/s |
Black Print Speed | ≤180mm/s,normal 30-60mm/s |
Input Type | Color |
Non-Domestic Product | No |
Model | Creality3D Ender-3 |
3D Technology | FDM |
Product Line | Craelity 3D Printer |
Resume printing function | Yes |
Input | AC 100-265V 50-60Hz |
Maximum Resolution | 300 x 300 DPI |
Output | DC 24V 15A 360W |
Connectivity | USB 2.0 |
Supported Paper Size | 220*220*250MM |
Brand | Creality 3D |
Nozzle Diameter | 0.4mm |
Max. Printing Depth | 220mm |
Supported Scanning Sizes | A1 (594 x 841 mm) |
Technology | FDM |
Max. Printing Width | 220mm |
Type | 3D Printer |
Layer thickness | 0.1-0.4mm (adjustable) |