Auto Cool 180° is the coolant of choice for many servicing and tuning specialists throughout the UK and Europe.
For modern everyday cars, no other coolant offers the complete protection of Evans waterless coolants.
Auto Cool 180°
Waterless Coolant for Modern Production Cars
No Water
Auto Cool 180° contains no water eliminating the problems caused by water based coolants, increasing reliability and extending engine life.
Long Life
Auto Cool 180° has been proven to last more than 20 years and a million miles in service without the need for replacement.
Protection
Auto Cool 180° reduces cavitation erosion by 75% compared with water based coolants and eliminates oxidation corrosion.
-40°c to +180°c
Auto Cool 180° has a boiling point above 180°c eliminating the risk of overheating and boil-over associated to water based coolants.
Low Pressure
Auto Cool 180° generates 75% less vapour pressure than water based coolants, significantly reducing strain on hoses, seals and gaskets.
Non Toxic
Auto Cool 180° has been tested and certified as Non Toxic by an EPA approved laboratory. It is biodegradable and will not bio-accumulate.
Application
Modern production cars primarily fabricated from a mixture of cast iron, copper, steel and aluminium components
Typical Characteristics
Physical State : Low Viscosity Synthetic Liquid
Boiling Point : Above 180°C
Freezing Point : Below -40°C
Colour : Yellow Clear
Odour : Almost odourless
Taste : Slightly Sweet, Non-Toxic but not recommended for human consumption
ASTM & ISO Standards
Evans in association with ASTM committee D15.22 have developed a specific range of standards for waterless engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards.
Prep Fluid
Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.
Evans prep fluid is used to :
- Hygroscopically absorbs water
- Ensures all residual water is removed from the system
- Ensures that Evans coolants will meet the water content limits and provide peak performance
Additional products within the Evans product range include...
