eBay

Features:

1、Adopt 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2，Ability to reproduce patterns of custom waveform.

2、Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.

3、Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.

4、Max. output frequency(sine wave) up to 40MHz, 200MSa/s sampling rate and 14bits vertical resolution.

5、Completely independent dual channels output, synchronizing operation and adjustable phase difference.

6、Great improvement for square wave performance, square frequency range up to 15MHzwith no distortion.

7、60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits.

8、High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.

9、High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.

10、Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.

11、Pulse pulse width and pulse cycle time is precisely adjustable, adjust the range of 30nS-4000S

12、Scanning features: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; sorward, backward and roundtrip sweep directions.

13、With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.

14、Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.

15、-9.99V~9.99V DC offset range, offset resolution: 0.01V.

16、With digital signal output function, CMOS output range 0~10V.

17、Storage feature: can store 100 groups of parameters set by the user and extract at any time.

18、Counter function: with DC and AC coupling modes.

18、Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to

19、output from the instrument.

20、Communication function: the PC can be used to control the instrument.

21、With output short-circuit protection: all signal output can work 60s under load short-circuit condition.

Specifications:

Model		JDS6600-40M
Sine wave frequency range		0~40MHz
Square wave frequency range		0-25MHz
Triangle wave frequency range
Pulse wave frequency range		0~6MHz
TTL digital wave frequency range
Arbitrary frequency range
Pulse width adjustment range		40nS~4000S
Square wave rise time		≤10ns
Minimum frequency resolution		0.01uHz（0.00000001Hz）
Frequency accuracy		±20ppm
Frequency stability		±1ppm/3hours ±1ppm/3 hours
Waveform characteristics
Waveform type		Sine, Square, pulse (adjustable duty cycle, precise adjustment of pulse width and period), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting offset), half wave, full Wave, positive staircase wave, anti-ladder wave, noise wave, exponential rise, exponential drop, multi sonic wave, Symplectic pulse and Lorenz pulse and 60arbitrarywaveforms
Wave length		2048 points
Waveform sampling rate		266MSa/s
Waveform vertical resolution		14-bits
Sine wave		≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz)
		<0.8%(20Hz~20kHz,0dBm)
Square wave and pulse wave		≤5%
Pulse wave		0.1%~99.9%
Partial sine wave		0.1%~99.9%
Sawtooth wave		≥98%(0.01Hz~10kHz)
Output characteristics
Sine wave amplitude range		10MHz ≤ Frequency ≤ 30MHz
		2mVpp~10Vpp
Square wave, Triangle wave amplitude range		Frequency ≤ 10MHz	10MHz ≤Frequency ≤25MHz
		2mVpp~20Vpp	2mVpp~5Vpp
Amplitude resolution		1mV
Amplitude stability		±0.5%/5 hours
Flatness of amplitude		±5%(<10MHz); ±10%(>10MHz)
Waveform output
Output impedance		50Ω±10% (typical)
Protection		All signal outputs can work within 60 when the load is short-circuited.
DC offset
Offset adjustment range		0.2V <Output Range ≤ 2V
		-2.5V~2.5V
Offset resolution		0.01 V
Phase characteristics
Phase adjustment range		0~359.9o
Phase resolution		0.1o
TTL/CMOS output
Low level		<0.3V
High level		1V~10V
Level rise/fall time		≤20ns
External measurement function
Frequency meter function		1Hz~100MHz
		Gate time 0.01S~10s continuous adjustment
Counter function		0-4294967295
		DC and AC coupling methods
		Manually
Input signal voltage range		2Vpp~20Vpp
Pulse width measurement		0.01us resolution, maximum measurable 20s
Period measurement		0.01us resolution, maximum measurable 20s
Sweep function
Sweep channel		CH1 or CH2
Sweep type		Linear sweep, logarithmic sweep
Sweep time		0.1s~999.9s
Setting range		Any setting between the maximum output frequency of the corresponding model of the starting point (0.01Hz) and the end point
Sweep direction		Forward, reverse and round trip
Bursting function
Number of pulses		1-1048575
Burst mode		Manual burst, CH2 burst, external burst (AC), external burst (DC)
General specifications
Display	Display type	2.4 inch TFT color LCD display
Store and load	Quantity	100
	Position	00 to 99 (00 memory location parameter is loaded by default as power on)
Arbitrary wave	Quantity	1 to 60 total 60 groups (15 groups by default as power on)
Interface	Interface mode	USB to serial interface
	Extension interface	With TTL level mode serial interface for user secondary development
	Communication speed	Adopt standard 115200bps
	Protocol	Using the command line, the protocol is made public
Power supply	Voltage range	DC5V±0.5V
Manufacturing technology	Surface mount technology, large-scale integrated circuits, high reliability, long service life
Prompt tone	Users can turn on or off by setting program
Operating characteristics	All key operations, knob continuous adjustment
Environmental conditions	Temperature: 0~40℃ Humidity: <80%

Weight: 1100g(approx.)

Plug Type: US plug, EU plug, AU plug, UK plus (Optional)

Voltage: AC100-240V

Package Includes:

1 x JDS6600Dual-channel Signal Generator
1 x Power Adapter
1 x USB Cable
2 x Signal Connecting Cables
1 x English User Manual
1 x BNC Cable