Model:800S
Applications
Main characteristics
Technical parameters
Size:
Control interface
This dispenser provides both I/O and RS232 interface of power level. PWL control interface is led by standard 12pin (2.54mm) socket CN3of the control board,
RS232 control interface is led by the standard 3pin (2.54mm) socket CN7.
Pins | Signal Description | |
1 | -24V | Operating Voltage cathode |
2 | +24 VDC | Operating Voltage anode |
3 | 0 V | Link with Operating Voltage anode |
4 | Pay out | Input, Low-Level(min 200mS) effective |
5 | Reset | Input, Low-Level(min 200mS) effective |
6 | OV | Link with Operating Voltage cathode |
7 | VD | Input, Low-Level (min 200mS) effective. use as Enable Signal |
8 | Callback | Input, Low-Level (min 200mS) effective |
9 | Out ok | Output Low-Level effective |
10 | Lower | Output Low-Level effective |
11 | Error | Output Low-Level effective |
12 | Empty | Output Low-Level effective |
Pins | Signal Definiens | Signal Description |
1 | GND | Ground |
2 | RXD | RS232 receiver port |
3 | TXD | RS232 send port |
Packing:
Note:
The cable has 2 options:
1.Cable 1 (Default)
2 Cable 2 (Specify), if you need Cable2, please message me.
Card Mouth :
K9 card