Purpose: pulse counting.
Basic technical data
The transfer device must operate on impulses:
positive polarity with amplitude from 5 to 100V
negative from 3 to 100 V
The duration of the input pulses should be in the range of 0.5 - 10 μsec.
The resolution time of the device for double pulses is no worse than 10 μsec.
The maximum counting rate of periodic pulses is at least 100 kHz.
Counting capacity - 105 pulses.
The device is equipped with a connector for connecting a pre-amplifier that consumes 10 mA of anode current and no more than 0.5 A of filament current, and the output pulse from it must be positive. It is possible to connect the BGS-2 block from the B-2 installation. The possibility of serial and parallel operation of two devices is provided.
Power consumption - 80 W.
Power supply - from AC mains 110/127/220 V with a frequency of 50 Hz with possible fluctuations ±10%.
The device is designed for 8-hour continuous operation in the ambient temperature range from +10 to +35°C, and relative humidity up to 80%.
OG-3 & OG-4 tubes.
Year of manufacture of the device: 1965-1966.
Dimensions: 290 X 195 X 235 mm.
Weight - 10 kg.