Uponor Base 230V
1088331 Uponor Base flexiboard X-24 6X 230V
1120075 Uponor Base thermostat display T-27
1058422 Uponor Base thermostat standard T-23
- With this system you can use any of 230V NC (Normally closed) actuators that are available in my store. Ofcourse you have to check connection type of your manifold at first - usually it's M30x1,5 in EU.
- Flexiboard X-24 can control up to 6 Thermostats and 12 actuators.
- Both T-27 and T-23 thermosats can control 5 actuators at once if necessary.
Uponor Base is the wired individual room temperature control for 230 V installations.
The product range offers a choice between basic thermostats with a dial (T-23, T-24, T-25) and electronic thermostats with a display (T-26, T-27) for on-wall and flush mounting. The new thermostat T-27 offers noiseless switching making the thermostat perfectly suited for the sleeping room.
The range of Uponor Base flexiboard X-24, X-25, X-26, X-27 provides highest flexibility and time savings during installation as the assignment of thermostat and actuator can be done even after wiring. The allocated actuators can be changed later on without difficulty. Multiple actuators can also be allocated to only one room thermostat. The result is that there is no more need for re-wiring on site. Uponor Base flexiboard is available for connection of 6 or 8 room thermostats and up to 12 actuators.
The product range offers a choice between basic thermostats with a dial (T-23, T-24, T-25) and electronic thermostats with a display (T-26, T-27) for on-wall and flush mounting. The new thermostat T-27 offers noiseless switching making the thermostat perfectly suited for the sleeping room.
The range of Uponor Base flexiboard X-24, X-25, X-26, X-27 provides highest flexibility and time savings during installation as the assignment of thermostat and actuator can be done even after wiring. The allocated actuators can be changed later on without difficulty. Multiple actuators can also be allocated to only one room thermostat. The result is that there is no more need for re-wiring on site. Uponor Base flexiboard is available for connection of 6 or 8 room thermostats and up to 12 actuators.
Benefits of wired controls:
- - Clear and appropriate range of thermostats
- - Noiseless switching with NEW thermostat T-27
- - Neat installation on the wall or in the distribution cabinet
- - No more need for re-wiring on site with flexiboard wiring unit
Uponor Base Flexiboard is a 230 V control that enables
individual room control for up to 6 rooms.
The Uponor Base Flexiboard control distributor, in
combination with prefabricated distribution stations,
makes work much easier.
Convenient allocation of the actuators to the room thermo-stats via a selector switch. This means there is no more need for re-wiring on site. The allocated actuators can be changed lateron without difficulty.Multiple actuators can also be allocated to one room thermostat. The use of Uponor Base Flexiboard in the prefabricated distribution station eliminates the need for a terminal diagram. This saves the installer time, because he can perform the allocation conveniently in a matter of seconds using the selector switches and can also change it at will without any effort.