Product Features:
Compact shape
Easy to operate.
Adjustable voltage.
with indicator light;
Wide range of applications, suitable for fast charging source test aging/DIY power supply modification, etc.
Compact shape
Easy to operate.
Adjustable voltage.
with indicator light;
Wide range of applications, suitable for fast charging source test aging/DIY power supply modification, etc.
Product parameters:
Style 1: PD/QC2.03.0 decoy
Product description:
PD/QC2.03.0 decoy, its identification logic is: decoy trigger fixed voltage. However, if the voltage to be decoyed is not available, the voltage will be applied to the next gear. For example: if the module is set to 15V, the decoy will apply the next level of 12V if your PD power supply is at most 12V, or if there is no 15V, then the next level is 12V. PD decoys have a strict communication format. It will not decoy higher voltages, nor will it increase or decrease the voltage output if no voltage is available. It cannot change the power, voltage or current of the power supply.
Whether the module is chosen with E-mark or not depends on the actual requirements. The power without E-mark can only be supported up to 60W, and the need to output more power requires E-mark support. type-c female input needs the line to be able to support E-mark if it is to induce 5A. type-c male input modules come with analogue E-mark.
Product parameters:
Colour: Blue
Fast charging support protocol:PD2.0/PD3.0, QC2.0/QC3.0
Support voltage:5V, 9V, 12V, 15V, 20V (voltage stepping is not supported)
Voltage adjustment: Adjust the dip switch to control the voltage output according to the table on the back of the board
Maximum power: Support up to 100w ( 20V/5A ), need to match with emark cable
Dimensions: 48*16*5mm (including DC and C-port length)
PD/QC2.03.0 decoy, its identification logic is: decoy trigger fixed voltage. However, if the voltage to be decoyed is not available, the voltage will be applied to the next gear. For example: if the module is set to 15V, the decoy will apply the next level of 12V if your PD power supply is at most 12V, or if there is no 15V, then the next level is 12V. PD decoys have a strict communication format. It will not decoy higher voltages, nor will it increase or decrease the voltage output if no voltage is available. It cannot change the power, voltage or current of the power supply.
Whether the module is chosen with E-mark or not depends on the actual requirements. The power without E-mark can only be supported up to 60W, and the need to output more power requires E-mark support. type-c female input needs the line to be able to support E-mark if it is to induce 5A. type-c male input modules come with analogue E-mark.
Product parameters:
Colour: Blue
Fast charging support protocol:PD2.0/PD3.0, QC2.0/QC3.0
Support voltage:5V, 9V, 12V, 15V, 20V (voltage stepping is not supported)
Voltage adjustment: Adjust the dip switch to control the voltage output according to the table on the back of the board
Maximum power: Support up to 100w ( 20V/5A ), need to match with emark cable
Dimensions: 48*16*5mm (including DC and C-port length)
Style 2: PD3.1 Decoy
Product Description:
Using the hardware PD3.1 protocol chip, the recognition logic is: the decoy triggers a fixed voltage. However, if the voltage to be decoyed is not available, the voltage will be applied to the next gear. For example: if the module is set to 15V, if your PD power supply is at most 12v, or if there is no 15V, then the next level is 12V, then the decoy will apply the next - level 12V. PD decoys have a strict communication format. It will not decoy higher voltages, nor will it increase or decrease the voltage output if no voltage is available. It cannot change the power, voltage or current of the power supply.
Whether the module is chosen with E-mark or not depends on the actual requirements. Without E-mark the power can only be supported up to 60W, for higher power output, E-mark support is required. type-c female input needs the cable to be able to support E-mark if it is to deceive 5A. type-c male input modules come with analogue E-mark.
Module currently supports 5/12/20/28V output
Product parameters:
Colour:Black
Support voltage:5V/12V/20V/28V four-position voltage (actual value depends on your power supply)
Current:5A
Input: Type-C female input (connect to charger)
Output: DC5.5 output (connect to load/aging device)
Dimensions: 45*15*5mm (including DC and C port length)
Length of individual motherboard 30mm Width between fixing holes 14mm
Maximum power: Supports up to 160w (28V/5A) (actual value depends on your power supply)
With indicator light
Operating instructions: Power on automatically polled to the highest voltage, for example, the power supply supports PD3.1 under 28V will start from 5V to the highest voltage 28V keep stop (support down compatible voltage), the corresponding voltage has a corresponding indicator.
Tip: The connected Type-C dual male cable supports PD3.1 before the 28V voltage can be tricked.
Note: product batches are different and are shipped randomly with/without heat shrink tubing;
Some PD3.1 power supplies may not be compatible, if you need to buy in bulk, take a few samples to test first to see the effect.
Product Description:
Using the hardware PD3.1 protocol chip, the recognition logic is: the decoy triggers a fixed voltage. However, if the voltage to be decoyed is not available, the voltage will be applied to the next gear. For example: if the module is set to 15V, if your PD power supply is at most 12v, or if there is no 15V, then the next level is 12V, then the decoy will apply the next - level 12V. PD decoys have a strict communication format. It will not decoy higher voltages, nor will it increase or decrease the voltage output if no voltage is available. It cannot change the power, voltage or current of the power supply.
Whether the module is chosen with E-mark or not depends on the actual requirements. Without E-mark the power can only be supported up to 60W, for higher power output, E-mark support is required. type-c female input needs the cable to be able to support E-mark if it is to deceive 5A. type-c male input modules come with analogue E-mark.
Module currently supports 5/12/20/28V output
Product parameters:
Colour:Black
Support voltage:5V/12V/20V/28V four-position voltage (actual value depends on your power supply)
Current:5A
Input: Type-C female input (connect to charger)
Output: DC5.5 output (connect to load/aging device)
Dimensions: 45*15*5mm (including DC and C port length)
Length of individual motherboard 30mm Width between fixing holes 14mm
Maximum power: Supports up to 160w (28V/5A) (actual value depends on your power supply)
With indicator light
Operating instructions: Power on automatically polled to the highest voltage, for example, the power supply supports PD3.1 under 28V will start from 5V to the highest voltage 28V keep stop (support down compatible voltage), the corresponding voltage has a corresponding indicator.
Tip: The connected Type-C dual male cable supports PD3.1 before the 28V voltage can be tricked.
Note: product batches are different and are shipped randomly with/without heat shrink tubing;
Some PD3.1 power supplies may not be compatible, if you need to buy in bulk, take a few samples to test first to see the effect.
Product list:
1X decoy module
1X decoy module
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Fill your shipping info
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.