FMUSER 100w 150w fm transmitter for radio broadcasting 100 watt 150 watt fm broadcast transmitter can remotely monitor equipment

*  Frequency: 87.5-108MHz

* Frequency step value: 10KHz

*  Modulation method: FM, peak deviation ± 75KHz

*  Frequency stability: <± 100Hz

*  Frequency stabilization method: PLL frequency synthesizer

*  RF output power: 0 ~ 150W, step 0.1W, error ± 0.5dB

*  Harmonic suppression: ≤-72dB

*  Inband residual wave: ≤-72dB

*  Asynchronous AM SNR: ≥-80dB (no modulation) ≥-65dB (400Hz, 100% modulation)

*  Synchronous AM SNR: ≥-70dB (no modulation) ≥-60dB (400Hz, 100% modulation)

*  RF output impedance: 50Ω

*  RF Output Connector: N Female (L16)

*  Audio Input Connectors: XLR Female and RCA Female

*  AUX input connector: BNC female

*  Pre-emphasis: 0us, 50us, 75us (user setting)

*  Mono signal to noise ratio: ≥ 80 dB (20 to 20KHz)

*  Stereo signal-to-noise ratio: ≥ 80 dB (30 to 15KHz)

*  Stereo resolution: ≥ -55dB

*  Audio frequency response: 30 ~ 15000Hz ± 0.4dB

*  Audio distortion: <0.1%

*  Audio level gain: -15dB ~ 15dB step 0.5dB

*  Audio input: -15dB ~ 0dB

*  Power supply voltage range: 110V ~ 260V (global voltage)

*  Power consumption: <320VA

*  Operating temperature range: -10 to 45 ℃

*  Working mode: continuous work

*  Cooling method: forced air cooling

*  Cooling method: <95%

*  Altitude: <4500M

*  Dimensions: 484 x 260 x 44 mm without handles and protrusions, 19 "1U standard rack.

*  Weight: 5Kg

*  Default Password: 000008

1. Connect the antenna first, then switch the power. If you do it reversely, the whole equipment could be burned!!

1 * 150W fm transmitter

Introduction:

FMT5.0-150H FM radio transmitter is highly reliable, lighter in weight and easier to operate than previous version of transmitter. This transmitter adopts a simple-style design concept. It integrates the 150W FM stereo transmitter exciter, power amplifier, output filter and switching power supply in a 1U high 19-inch standard case, reducing the connecting cables between the components.

Features:

• User-friendly digital LCD panel, using one rotary knob to control.

• The integrated LCD screen displays all the parametric including: transmitter frequency, stereo and mono, volume, amplifier tube temperature, audio signal UV meter, forward power, reflected power, modulation mode, pre-emphasis etc,.

• 1U 19-inch thickened all-aluminium case, strong and excellent heat dissipation.

• Precise PLL frequency generation system, to ensure that the frequency not drift away for more than10 years, with built-in high-quality stereo encoder.

• Outstanding power AGC balance control system, adjustable power output from 0 to 150watts, and automatic gain power control to maintain output power within set range without drifting.

• Signal input supports XLR and RCA audio inputs,  and also SCA and RDS signals using the BNC connector AUX.

• The RF amplifier uses LDMOS transistors to withstand even severe load mismatch exceeding the 65 : 1 VSWR at a 5dB compression point.

Panel Description:

Strong air cooling system embeded on both front and rear side of transmitter for safer and more stable performance