5.5KW AC230V Hybrid Inverter Pure Sine Wave+MPPT 80A Bluetooth/Battery BMS 48VDC

For US customers: L1 connected to L, L2 connected to N=240V. L+N=240V

Y&H SUNT-5.5KW hybrid inverter is suitable for residential and light commercial use, maximizing self-consumption rate of solar energy and increasing your energy impendence.During the day, the PV system generates electricity which will be provided to the loads initially. Then, the excess energy will charge the battery via SUNT 5.5KW. Finally, the stored energy can be released when the loads require it. The battery can also be charged by the diesel generator to ensure uninterrupted supply in the event of grid blackout.

Features:

Easy and simple to understand display.Visual power flow screen

Built-in 80A MPPT Charger

Programmable multiple operation modes: on-grid/off-grid & UPS

Charger and discharge work time control.

Configurable battery charging - current/voltage based on applications

Limiting function installed to prevent excess power overflow to grid ("Zero export")

Smart settable 3-stage charging for optimized battery performance

Overload/over-temperature/short-circuit protection

Supporting Wi-Fi and Bluetooth Communication

Application:

Marine (vessel power management)

Power shedding (home/office/factory)

UPS (Uninterrupted Power Supply)

Remote locations with solar

Building sites

Military locations

Telecommunication

RV

Energy storage

Emergency Power Supply

Peak shaving and valley filling applications：

1: Use utility Timed charging to the battery (valley electricity, when electricity is cheap)

2：Solar energy and utility will charge battery（Solar and battery energy storage supplies power to loads during peak hours. And when the electricity bill is cheap, Use utility Timed charging to the battery.）

3：Solar energy will be the only charging source even if utility is available.（Peak power, when the electricity bill is high.Set utilities not to charge.）

Self-issuance for self-use：

1.Solar energy will supply power to the load as priority, and the excess power will charge the battery. When the solar panel power is insufficient, AC bypass will supplement(In times of high electricity costs, you can reduce the battery AC charging stop voltage to avoid charging the battery at peak utility power)

2.Peak Cutting and Valley Filling. When electricity is cheap, the battery timed charging. Use storage power during peak hours.

3.On/Off grid mode: Solar power first supplies the home load and fully charges the battery, then the excess power is transferred to the home grid. Reduces electricity costs. (Zero Export To CT)

4.UPS mode, solar panel or battery power. You have the flexibility to set the battery discharge voltage depth. Ensure that there is enough power to power critical loads in the event of a power outage.

Four modes can be choose when charging battery:
 
Utility first: Utility will charge battery as first priority source, then Solar Power.
Solar first: Solar will charge battery as first priority source, then Utility Power.
Solar and Utility(default): Solar Power and Utility power will charge battery at the same time.
Only Solar: Solar Energy as the only source charge battery.

Three Output modes can be choose：

Utility first :Utility will provide power to theloads as first priority, Then Solar Power, battery Power
Solar first: Solar energy provides power to the loads as first priority. If solar energy is not sufficient to power all connected loads, utility will supply power to the loads at the same time，then battery power.
SBU Priority: Solar energy provides power tothe loads as first priority. If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.