Pwm 60A Control The Generator Hho With Detection Automatic Of Power
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
PWM 60A FOR HHO generator control with Automatic detection of power. Designed for check up to60TO 12 / 24V DC. With voltmeter and ammeter 60TO 12 / 24V DC. With voltmeter and ammeter
Our products are designed and produced within the European Union in our company or partners in compliance with the technical standards and industrial production of such products.
One of the main and most important components of a good HHO system is the PWM (Pulse Width Modulator). This small electronic circuit board controls the electrical current flowing through the HHO system and regulates the flow so that the best possible hydrogen is produced and maximum fuel savings are achieved.
If your running any HHO generator you will need our PWM60A to better control the amperage, prevent the system from overheating and have more HHO gas emissions. This is one of the most important gadgets in your HHO system. Maintains the correct gas/water ratio to make your engine run smoothly and efficiently by quickly buttoning the power on and off. This prevents the HHO generator from overheating and keeps things at a manageable temperature.
The PWM60A was designed for an automatic HHO system power supply without the need for relays or picking up the signal from the alternator/ignition key, making the system safer to use and easier to install.
The new PWM60A works based on the voltage of the machine/vehicle:
- Engine stopped - Voltage in car/truck 12V or 24V - PWM does not work;
- Working motor - Voltage in car/truck 13.8V or 27.6V - PWM works.
The PWM60A automatically detects when the car engine is running and automatically switches to the HHO system, without any additional requirements. The device will automatically turn off when the car engine is turned off or not running.
The device is also able to control a water level sensor inserted into the tank to turn off the system when the level drops below a certain point.
It has ammeter and VOLTMETER incorporated in the front panel, in order to allow better regulation of the system.
What are the main advantages?
Efficiency: HHO generators will run cooler than standard linear amplifiers, requiring substantially less mass heat dissipation;
Ampere Control: Controlling the amperage entering the generator will be very easy to do. The ability to control amperage keeps the cell running at cool operating temperatures and extends the life of the cell, while increasing H2 production.
Installation: It will make the HHO system easier and safer to install and use because there will be no need for relays or picking up the signal from the alternator/ignition key like in other PWMs on the market.
Technical specifications
• Direct connection from the CELL generator HHO battery input, without external relays;
• 60A MAX HHO cell power supply;
• 60A external automotive fuse;
• Dual LED meter: voltmeter + ammeter, 5 to 40V, 60A;
• Automatic battery voltage detection and automatic configuration for: +12V / +24V;
• Quad sensor Chip operational with 1% detector voltage tolerance Zenner;
• Automatic HHO mobile power on when the engine is running;
• 1 Second PWM control delay, after motor detection;
• Automatic HHO cell phone shutdown when the engine is off;
• PWM soft start at maximum amps off power;
• integrated trimmer for PWM control: 0 - 100% of HHO cell power supply;
• Logic sensor IC;
• Integrated 4-way power barrier: Positive, Gnd, CELL - OUT, CELL + OUT;
• Optional water tank sensor switch integrated into the system;
• Compact black ABS cabinet + aluminum heatsink for the 60A Mosfet;
• Dimensions: 110X85X40 mm.
The PWM60A kit includes the following items:
Device • 1 Pcs PWM60A Detection Auto Power;
Fuse • 1 PC external Automotive 60A;
• 1 Pc 50cm red wire, diameter 0.5mm to power device directly from the battery;
• 1 Pc 50cm black wire, diameter 0.5mm to power device directly from the battery;
• 4 pieces yellow crimp terminal;
• 2 piece Wrappers.
Our products are designed and produced within the European Union in our company or partners in compliance with the technical standards and industrial production of such products.
One of the main and most important components of a good HHO system is the PWM (Pulse Width Modulator). This small electronic circuit board controls the electrical current flowing through the HHO system and regulates the flow so that the best possible hydrogen is produced and maximum fuel savings are achieved.
If your running any HHO generator you will need our PWM60A to better control the amperage, prevent the system from overheating and have more HHO gas emissions. This is one of the most important gadgets in your HHO system. Maintains the correct gas/water ratio to make your engine run smoothly and efficiently by quickly buttoning the power on and off. This prevents the HHO generator from overheating and keeps things at a manageable temperature.
The PWM60A was designed for an automatic HHO system power supply without the need for relays or picking up the signal from the alternator/ignition key, making the system safer to use and easier to install.
The new PWM60A works based on the voltage of the machine/vehicle:
- Engine stopped - Voltage in car/truck 12V or 24V - PWM does not work;
- Working motor - Voltage in car/truck 13.8V or 27.6V - PWM works.
The PWM60A automatically detects when the car engine is running and automatically switches to the HHO system, without any additional requirements. The device will automatically turn off when the car engine is turned off or not running.
The device is also able to control a water level sensor inserted into the tank to turn off the system when the level drops below a certain point.
It has ammeter and VOLTMETER incorporated in the front panel, in order to allow better regulation of the system.
What are the main advantages?
Efficiency: HHO generators will run cooler than standard linear amplifiers, requiring substantially less mass heat dissipation;
Ampere Control: Controlling the amperage entering the generator will be very easy to do. The ability to control amperage keeps the cell running at cool operating temperatures and extends the life of the cell, while increasing H2 production.
Installation: It will make the HHO system easier and safer to install and use because there will be no need for relays or picking up the signal from the alternator/ignition key like in other PWMs on the market.
Technical specifications
• Direct connection from the CELL generator HHO battery input, without external relays;
• 60A MAX HHO cell power supply;
• 60A external automotive fuse;
• Dual LED meter: voltmeter + ammeter, 5 to 40V, 60A;
• Automatic battery voltage detection and automatic configuration for: +12V / +24V;
• Quad sensor Chip operational with 1% detector voltage tolerance Zenner;
• Automatic HHO mobile power on when the engine is running;
• 1 Second PWM control delay, after motor detection;
• Automatic HHO cell phone shutdown when the engine is off;
• PWM soft start at maximum amps off power;
• integrated trimmer for PWM control: 0 - 100% of HHO cell power supply;
• Logic sensor IC;
• Integrated 4-way power barrier: Positive, Gnd, CELL - OUT, CELL + OUT;
• Optional water tank sensor switch integrated into the system;
• Compact black ABS cabinet + aluminum heatsink for the 60A Mosfet;
• Dimensions: 110X85X40 mm.
The PWM60A kit includes the following items:
Device • 1 Pcs PWM60A Detection Auto Power;
Fuse • 1 PC external Automotive 60A;
• 1 Pc 50cm red wire, diameter 0.5mm to power device directly from the battery;
• 1 Pc 50cm black wire, diameter 0.5mm to power device directly from the battery;
• 4 pieces yellow crimp terminal;
• 2 piece Wrappers.
SALE NOT SUBJECT TO VAT EX ARTICLE 1,2,3e5 DPR 26:10/1972 N63 AND SUBSEQUENT AMENDMENTS
| MPN | DC4000T |
| Posizionamento sul veicolo | Anteriore |
| Garanzia produttore | 2 anni |
| Marca | HHO Plus |