M.2 SATA NGFF SSD Enclosure, SSK SHE-C320 Aluminum USB 3.2 USB-C (NOT NVMe).
SSK Aluminum USB 3.2 Gen 1 to M.2 SATA NGFF SSD Enclosure Adapter, External SATA Based M.2 Solid State Drive Enclosure Reader (For M.2 SATA SSD only)
Only for M.2 NGFF SATA SSD
SSK SATA M.2 SSD Enclosure adopts high performance controller chip, USB3.2 Gen 1 interface, up to 5Gbps high-speed data transmission.Also inclouded Type-c adapter,meets all of your needs,This USB A to USB C adapter is compatible with ANY laptop/tablet/smartphone with a Type-C port . Complies with UASP which can effectively improve the speed.
Note: Before purchasing, please check your SSD label. If it prints PCIE, NVME, this enclosure will not support. Please purchase another model SHE-C325.
M.2 NGFF SATA SSD Enclosure adapter
5Gbps high-speed data transmission
Compatible Multi- system
Blue Indicator
Excellent heat dissipation
Support SSD Size
Supports SATA-Based M.2/NGFF(B Key&B+M Key) 2242 2260 2280mm SSD.
SSK M.2 SATA SSD Enclosure connector only has one gear to compatible both (B Key&B+M Key) SSD, if your SATA SSD has two slots, one slot will be left in blank. It will not effect the function. It does NOT support NVME PCI-E based M key and M+B key SSD.
Attention: If your SSD size is 22*80mm, please press down the plastic lock catch A and B, so it will not push up the SSD, and will never make it bend.Please read our User Manual carefully
Supports B Key and B+M Key M.2 SATA SSD
The slot of Our M.2 SATA SSD case has a single notch B Key. It is not only supports B Key SATA SSD and also supports two notches B+M key SATA SSD. You can use it directly when you has two notches SATA SSD.
USB 3.2 Gen 1 super fast, Data transfer rate up to 5Gbps;
We tested our enclosure with SATA SSD, the actual speed can reach to 400MB/s~450MB/s on R/W.
SSD needs to be fully inserted for working
If you encounter a situation where your hard disk cannot be read or Hardware error, please confirm your hard drive is M.2 NGFF SATA SSD. Secondly, please confirm whether your SSD is fully inserted into the M.2 NGFF Slot. If not, you need to push the SSD into the M.2 NGFF Slot at a 45 degree angle.The pins of the SSD will be fully seated and coveredl.
Attention: If your ssd size is 22*80mm, please press down the plastic lock catch A and B, so it will not push up the SSD, and will never make it bend.Please read our User Manual carefully.
Main Features
Easy Installation
Easy installation,no driver required,no additional power required; Supports Plug & Play and Hot-Swapping.
For the brand new SSD, it may not be found, pls format it under disk management before the first time using.
Note:
1. It requires 1 screws to assemble the enclosure.When insert the SSD to house casing, as it is shrapnel design, If your ssd size is 22*80mm, please press down the plastic lock catch A and B, so it will not push up the SSD,and will never make it bend.On the other hand, please gently press the plastic lock catch C back to make it Chucking your SSD.
2.Dose not support the NVMe SSD, it only supports SATA-based M.2/NGFF(B Key&B+M Key) SSD 2242 2260 2280mm solid state drivers. If need NVME PCIE based SSD Enclosure, pls purchase another model HE-C325 from our Store. SSK M.2 SATA SSD Enclosure connector only has one gear which can suitable for both (B Key&B+M Key) SSD. If your SATA SSD has two slots, one slot will be left in blank. It will not effect the function.
3. It is also not compatible with MacBook original SSD.
4. After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT.
Features & details
Attention:Not compatible with MacBook original SSD
SupporFashion Design
Adopts aluminum alloy shell, Slim design, durable and excellent heat dissipation, be portable and easy to carry.
Multi OS Compatible
Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones. ( Attention: Type C to C cable is not included, included an USB 3.0 AM to Type-C Cable)
Why this item does not work with my SSD?
A: This SHE-C320 M.2 SSD Enclosure does not support PCIe NVMe SSD. it only supports SATA-based M.2/NGFF(B Key & B+M Key) SSD 2242 2260 2280mm. Please check your SSD label and connector. If it print PCIE, NVME, this enclosure will not support.
Why my laptop does not recognize the ssd and has a fatal error?
A: If there is a fatal errors or SSD can not be recognized:
First, Please confirm your SSD is M.2 NGFF SATA SSD; If it print PCIE, NVME, this enclosure will not support;
Second, please confirm whether your SSD is fully inserted into the SATA Slot. If not, you need to push the SSD into the NGFF SATA Slot at a 45 degree angle.The pins of the SSD will be fully seated and covered.
I see this enclosure just is the b key version, does it support my m+b key sata ssd?