Top Plate for Flexible Liner

Common problems including insufficient draw to power the stove, lack of heat output and leaking tar/smoke can all be rectified by re-lining the chimney with a Flexible Chimney Liner; an essential product when installing into an existing fireplace and chimney. By ensuring a sealed chimney from stove to terminal, your stove can only then operate to its full potential.

Top Plate to be secured down before securing a Flexible Chimney Liner in place. Typically used in conjunction with a Top Insert Sleeve and Top Clamp (sold separately). Please note, this item is listed by the internal diameter of the Flexible Liner it is to be used with and therefore, will measure greater than the diameter stated by up to 1”.

Basic Instructions – Cement the Top Plate down, pull the Flexible Liner through by approx. 100mm, insert the Insert Sleeve, secure Clamp around Liner and build up cement to hold in place.

• Part: Top Plate
• Brand: ChimFit
• Material: Galvanised
• Model code:
• Warranty: N/A
• Approvals: CE
• Fuels: All Solid Fuels, Gas & Oil
• Size: 375mm x 375mm
• Despatched from stock

Flexible Liner components are listed by the internal diameter of the Flexible Liner they are compatible with and are manufactured for use with Flexible Chimney Liners only. We take no responsibility for sizing if used for any other application.

This product can be returned to us within 30 days of purchase for a refund. You will need to obtain a returns number from us either directly or via an eBay Return Request and return the item in an unused, re-sellable condition for us to issue a refund.

A minority of locations unfortunately incur extra carriage charges due to location of courier hubs. This can affect (but not limited to) addresses in Scotland, Northern Ireland, North West/South West England and Islands. Should your order be affected, we shall contact you the following business day. This is independent of the eBay carriage calculator.