Car OBD2 Head Up Display Navigation HUD Mirror GPS HUD Projection Speedometer

100% New & Excellent Quality
Strictly QC, Each item was fully checked before shipping
FREE & FAST Shipping delivery with Tracking Number

 

1. OBD mode information display: vehicle speed, water temperature, voltage, fuel consumption,speed, single mileage, cumulative total mileage, driving time, system time, intake pressure, oil temperature, air-fuel ratio, intake pressure, acceleration test, brake Test, read streams,

navigate...

2. Alarms: overspeed alarm, overspeed alarm, high water temperature alarm, low voltage alarm,engine failure alarm, clear DTCs,free switching of kilometers and miles, free switching of KM/h & MPH, free switching of °C & ℉.

3. GPS mode information display: speed, travel time, satellite time, altitude, number of satellites, driving direction, single mileage, voltage, acceleration test, brake test, navigation...

4. High-definition display, no ghosting, clear effect during the day

5. Metal nanotechnology on the front to eliminate unwanted reflections for a clearer display

 

Material: ABS,PC.

Environment Temperature:-40°C-+80°C

Barometric Press :86-106KPa

Relative Pumidity :10%-95%

Environment Voice:<=60dB

Work Voltage:11V~18Vdc(12Vdc/200mA)

Sleep Current:<=30mA

Display Way:Virtual Image Reflection

Display Channel:HD LCD Display

Reflector Transmittance:98%

OBD2+GPS Dual Mode is Suitable For All Car Models.

Certificates:CE,RoHS,FCC

Navigation:(QR code to download and install)

 

Steps as below:

1.Confirm the APP installed successfully, and HUD is working.

Open the mobile Bluetooth,GPS,internet.

Click the wiiyii App,the mobile phone will auto connect with the HUD via Bluetooth.

2.If the mobile phone cannot connect to the Bluetooth device correctly, please follow the

instructions below:

HUD host needs to display normally. If the OBD system is unable to connect, please switch to

the GPS system,and display normally.

Check the mobile Bluetooth whether connected to other devices or not, if yes, please delete

the paired Bluetooth device, and connect to WYHUD

3. Turn off the Bluetooth and then turn it on, or restart the phone

 

Note:

There might be a bit color distortions due to different computer resolutions.

There might be a slight errors due to different hand measurement.

 

1x Monitor

1x Instruction Manual

1x Cloth

1x USB Cable

1x OBD Cable

1x Mat

PushAuction