2.5" 7+15 Pin Female to44PIN Male Adapter
 
 
Specification:
Brand new
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux
PCB size: 69mm x 14mm
SATA hard drive can be detected and used as a standard 2.5" IDE hard drive
Converts all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5" IDE device
Allows to connect a 7+15Pin SATA hard drive to a 44Pin IDE connector
7+15 Pin female design allows to connect directly to SATA hard drive without cables
One SATA 7+15P female connector for connecting to SATA hard drive
One IDE 44P male connector for connecting to 44P IDE connector
Compliant with Serial ATA specification revision 1.0
Supports Serial ATA data transfer rate up to 1.5Gb/s (150MB/s)
Easy install & no driver required
Super compact design & no space wasted
 
Package included:
 
    1PCS X SATA Female to 2.5" IDE Male Adapter
 
===================================================
2.5" 44PIN Female to 7+15P SATA Male Adapter
 
  • 100% brand new and high quality
  • Size:6.8 x 1.5 x 1.6cm
  • Professional design & No driver is needed, easy to use
  • JMB20330 chipset
  • 7Pin(Power) + 15Pin(Data) male SATA connector.
  • 44-Pin standard female IDE connector
  • Compliant with serial-ATA specification.
  • Mini board design & no space wasted.
  • The 44-Pin IDE 2.5" HDD to SATA Adapter can allows you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the laptop or desktop which have SATA connector.
  • Integrated chip provides a high performance, economic and reliable solution to use peripherals with SATA interface.
  • Supports MS Windows 98/NT/ME/2000/2003/XP/Vista, DOS, Mac, Linux
Package Included:
 
   1 x 2.5" IDE Female to 7+15P SATA Male Adapter
 
===================================================================
40 Pin IDE Female To SATA 22-Pin Male Adapter
 
Specification:
Brand new
Compatibale with: Windows 98/98SE/ME/2000/XP/Win 7 32bit/64bit
Fit for 40-pin IDE device, such as 3.5IDE, CD-ROM, CD-RW etc
Size: 60mmx22mm(LxW)
Converts parallel ATA to Serial SATA
Support ATA 100/133
Compliant with Serial ATA specification
Fully plug and play, no drive needed
 
Advice:
The IDE Hard Drive Jumper MUST be set to MASTER for this product to work.
"Having the IDE Hard Drive Jumper set to 'CS -Cable Select' or 'Slave' will not work."
 
Package included:
  1 x IDE SATA Adapter Card
========================================================================
2.5" to 3.5" 40Pin Female to Male Adapter
Features:
Brand New,2.5" to 3.5" Laptop IDE Hard Disk Drive HDD Adapter
The 2.5 to 3.5 IDE Adapter is work with all laptop IDE hard drives such as COMPAQ, Acer, Toshiba, Dell, IBM, Fujitsu, Sony and more
Connectors:
Female:Laptop hard drive 44-pin connector
Male:Desktop IDE Hard Drive 40-pin connector.
This adapter allows you to connect your 2.5" Notebook/Laptop HDD to 3.5" Desktop/PC easily and quickly,and transfer the data to the 2.5 inch hard disk safely

Package Included:
1 x 2.5 HD to IDE 3.5 Hard Disk Drive HDD Adapter
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Fill your shipping info

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques