1. Mirror body material: 6061, hard oxidation;

 

2. LED lighting is equipped with microswitch, with 2000 hour intermediate power consumption; Standby 60000 hours

 

3. Battery, CR2032, (not included)

 

4. Click function adjustment; 1Click=1MOA, material SUS304 black

 

5. ACRO mounting mode

 

 

Soft glue button;

 

1. Press the+key to start the machine 2. Press the - key for 3 seconds to shut down the machine 3. After the machine is started for 12 hours, it will automatically shut down (start timing according to the last operation) 4. Press the+key to increase the current (the maximum current remains unchanged), and press the - key to decrease the current (the minimum current remains unchanged) 5. Restart the machine after the machine is shut down and keep the original gear 6. Unplanned power off, After power on, keep the gear brightness before power off 7. Brightness adjustment has 10 gears (the brightness of gear 1 and gear 2 is in night vision mode) 6. The inching time is 230 seconds

 

Inching function

 

Enter the sleep mode after 120 ± 5 seconds without any operation in the power on state

 

In the sleep mode, a slight vibration energy is sensed to wake up immediately (without delay), and the gear set before sleep is maintained after waking up