Dbox 9.129 > Dbox 9.91/9.96
Dbox 9.129 is a newer version than 9.91 or 9.96
It works with more car models.
Works with DIESEL and PETROL cars.
2024 Hardware Model with ORIGINALE SAMSUNG chip.
So why people buy our product?
1. We order the best quality Japanese Chips which are available on market. Our Full Chip Lexia is V50 (not V48 or 4.3.1 like most of vendors on eBay) A+ Quality REV C. We sell A.1281 Z INTERFACE model from 2024, which is compatible with model up to 2022. Write to us if you need this version. This is the same tool as Citroen and Peugeot dealers use in their garages. It is compatible with PETROL and DIESEL cars.
1 We have the biggest experience with Original Dbox software on ebay. We sold over 2000 (!!!) Dbox plus 1700 in a set with Lexia 3. It gives 3700 altogether. You will not find a seller on ebay who sold even half number of this software.
Therefore you can be sure that you will get the best help you can get. We
will give you a well written guidebook (in English – not in
Russian like many other sellers) with step by step easy to follow instructions.
If for any reason you still have
problems with installation then we can connect with your computer using Teamviwer
and help you with installation.
1. Our service and our products have
been highly recommended by our customers, car garages from all around Great
Brittan and by car specialists from British auto repair forums like: mhhautos, cartechnology.
1. Works on Peugeot 307 and Citroen C5.
1.
LEXIA 3
DBOX 7.83 Interface latest version, works for both Citroen and Peugeot!
Dealer diagnostic scanner is well suited for comprehensive Citroen and Peugeot
cars diagnostic.
You can do all as authorized dealer does (off line features). This
diagnostics software allows you to perform complete diagnostics of all from1995
until present models. Diagnostics is performed via OBD-II connector (which is
located near steering wheel) or via manufacturer-specific connector (only older
cars, pre-2001). This item 100% works fine. It is tested by tens of users.
Interface
works with Citroens, Peugeots and Opel/Vaxhall (made by PSA)
Full adapter package with Lexia-3 Citroen/Peugeot Diagnostic for querying, management function, programming and diagnosing, etc. Citroen supports all models of Citroen, for programming, matching, diagnosing, etc. Latest software support testing all 2022 vehicles models, support the Peugeot 508.
Unlike other universal car scanner tools which only read fault codes, this software performs ALL Offline functions like the original dealer diagnostic tool.
The
following diagnostic functions are supported:
1.Read identification
Displays complete identification of control unit, e.g. part number,
software/hardware version, manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g.
"Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all
diagnostic fault codes.
For online options (ECU/BSI in some cars above 2017) please use online PSA account or use Dbox 7.57 (part of dbox 7.83) for cars made in 2017 and older.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor,
Coolant Temperature, etc.
Values can be displayed in graph, 9 values at once, or full listing (all measured
values). Logging to file is also supported, which allows offline analysis.
6.Actuator
test
Actuator
test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel,
lock/unlock doors, cut off fuel, etc..)
7.Programming
functions/Adaptation
This
feature is of great importance in all vehicles because systems like Engine
control units, Immobilizers, Airbags, Alarms, Body Control Units, and some
others, require you to perform reset or programming procedures after car repair
is done, or even configuration after replacing broken Control Unit. Latest
software version
Operation system:
For Dbox 7.83:
(MUST BE: Windows Professional or higher version, can't be HOME edition)
Windows
XP , vista, 7,8,10 is suggested for your
operation system (it has to be 32bit version).
Or you can install it on Virtual Machine. We can provide you all necessary software and instruction describing how to do it.
For Dbox 9.129
Languages:
Supports cars up to April 2022