(2) BRUSHLESS motors/gearboxes and (2) foam filled tires (Roughly 8"tall 2" wide)

Tested and confirmed working. 

They could be used for many electric powered vehicles(rc lawn mower, large scale rc crawler , DIY Segway etc).

They are BRUSHLESS dc motors with hall sensors.

YOU NEED A BRUSHLESS MOTOR CONTROLER TO RUN THESE

Power rating is 250W 

Rated for 24v 15Amp

Output rpm rating is 100rpm at 24v.(so this could be higher/lower depending on what voltage you use)

There is electric brakes installed which require power to UNLOCK or you can manually override them with the lever, or they can be completely removed with 6 screws as well. 

The large BROWN/YELLOW/BLUE wires are the phase wires.

The Small Brown/White are the electric brake (if used)

The Small Red/Black/Blue/Yellow/Green are for the Hall sensors(if used) 

These can be used with a sensored or sensorless controller(ESC) although a sensored controller will have much better torque.

With the current tire size and 24V they would do about 3-4 mph. 

Mounting holes are M6-1.0

Weight is 8 LBS each

Please check out the pictures and feel free to ask any questions you may have.

Thanks for looking.