Spray Adhesive Strong Glue DIY Vinyl Carpet Flooring Upholstery 500ml Heavy Duty

Customer Note:
Be aware that for this particular item we do not post remote areas such as Ireland, Channel Islands, Scottish highlands, Jersey. Your order may be cancelled if you are located in these areas of the country.

Trim Fix 500ml High Temperature Adhesive Spray Carpet Glue For Cars Van Lining

Trim-Fix is a high temperature resistant spray adhesive, that has been specially designed for fixing:

Interior vehicle trims;

Headlinings and carpet linings;

Fabric/Leather for seat upholsteries;

Foam or padding materials.

Trim-Fix forms its bond by sticking to itself, therefore sufficient adhesive must be present on both surfaces you are looking to bond together.

All surfaces must be kept clean and dry to ensure a perfect bond between surfaces. Trim-Fix works best when the adhesive is sprayed vertically onto one area, and horizontally on the other.

Trim-Fix is heat resistant and temperature stable up to 120°C (248°F) and extremely flexible, combined with its ease of use, it is the perfect adhesive for converting the interior of your vehicle.

If desired you can also separate the shelving unit in the middle and use the two parts separately.

Specifications:

Instructions: The surface to be bonded must be clean, dry and contaminant free. From approximately 25cm (10inch) spray one surface horizontally and the other vertically each to a minimum coverage of 80%. Allow the adhesive to become touch dry. Press firmly together from the centre working outwards to achieve a good contact and exclude any air bubbles.

For Full instructions for use and all health and safety information is printed on the aerosol

Surface Preparation:

• All surfaces must be clean, dry, and free from dust, grease, and any loose material

• If degreasing is necessary, a detergent/water treatment should be considered first. If this is not appropriate, a suitable solvent cleaner may be used. Always check the effects of degreasing solvents on plastics, rubber materials and painted surfaces. All traces of cleaning solvent must be allowed to evaporate before the adhesive is applied Application and bonding

• An even coat of adhesive should be applied to both surfaces to be bonded and allow the solvent to evaporate

• Drying is dependent on conditions, but bond should be made within 10 minutes of application

• Bring the two dry surfaces together and press together over the entire bonded area

Specifications:

Storage - Store in a cool dry well ventilated area at between 10-30°C

Shelf life - One year from the date of manufacture

Physical appearance - Low viscosity liquid

Colour - Amber

Chemical Type - Blend of synthetic rubber and resins

Solvent - Chlorinated Hydrocarbon

Viscosity Brookfield RVT 20rpm at 25°C [mPa.s] - Approx 500

Total solids content - Approx 26 %

Relative Density - Approx 1.2

SAFT Approx - 110⁰C

Package Included

Trim-fx Carpet Adhesive Spray 500ml

Shipping

Items are dispatched from our UK based warehouse in Rainham, Essex

We offer free postage on items and aim to dispatch all items on same day if purchased before 2pm, Monday to Friday except weekends and Bank holidays. Items are delivered to you within 2 to 3 working days

Please allow at least up to 7 days for delivery before opening a case or leaving Negative feedback as we do not have any control over courier services, however we have a dedicated team, love what we do and will do our best to get the parcels delivered to you. Dont you worry as the pressure is on us until you are 100% satisfied.