Compustar car starter VA5JR500-1A433 key fob FTX1400R AM keyless remote 1-Way FTX transmitter entry control keyfob clicker blue LED - Pre-Owned 1-Way Blue 993AMpo

1-Way FTX1400R-AM 4-Button Remote Control Transmitter.

VA5REH500-2WFX Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 seconds. The vehicle s parking lights will flash once with the successful completion of this step.
Within a second after cycling the ignition for the 5th time, tap the Lock button once for a half second. The parking lights will flash once to confirm the transmitter has been coded.
Exiting Programming: Programming is a timed sequence. If you can not get the remote(s) to program then the system enters Valet Mode. The parking lights will flash twice signaling the end of programming.

Specifications

Condition Pre-Owned 1-Way Blue 993AMpo
FCC ID VA5JR500-1A433
Part#

FTX1400R-AM
 
Keyfob Description: 
This is a Compustar 4 Button 1 Way Remote Transmitter.  

FCC ID: VA5JR500-1A433
Compustar FTX1400R-AM, 1-Way, Antenna ANT-1WAM, FCC ID:VAJR500-1WA433
Model Number: FTX1400R-AM 
Compatible Antenna Number: ANT-2WFMX
7087A-R500A433
Is this a 1 Way Keyfob?: Yes
Is this a 2 Way keyfob?: No  
Communication Method 	AM (1000 ft)
Remote Confirmation 	1-Way
Antenna 	ANT-1WAM
Communication Method 	Amplitude Modulation (AM)
Range 	1000 ft
Battery CR2025 X 2

Valet: Turns off all alarm and remote start features (if equipped) - also known as service mode.
Timer start: Activates remote start every 3 or 1.5 hours for a 24 hour cycle.
Turbo timer: Keeps the engine running for up to 4 minutes upon exiting the vehicle (remote start models only).
Passive arming/locking: Automatically lock/arms 30 seconds after unlock.
Unlock: Unlock and disarm the system by tapping the unlock button.
Remote start: Start the vehicle by tapping then holding the start button for 2.5 seconds.
Panic/Car find: Activate the siren and horn to locate the vehicle.
Lock: Lock and arm the system by tapping the lock button

Remote Start

Hold down the KEY button for 2.5 seconds to remotely start your engine to heat up/cool down your vehicle.

Keyless Entry

Press the LOCK or UNLOCK buttons to arm and disarm your security system, as well as lock and unlock your vehicle's doors.

Trunk Release

Hold the TRUNK icon to pop your trunk or to activate your power liftgate.
Dealer part # FTX1400RAM
Buttons 4 buttons: Lock, Unlock, Trunk, Remote Start
Frequency 433.92 MHz with Blue LED Light
Battery Type 2 x CR2025

Additional Information

Condition Explanation: Pre-Owned
 	
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections. 
 


Original CompuStar FTX FTX1400R-AM 1-Way 4-button remote control transmitter for various CompuStar, Arctic Start and FTX systems, see list below.

This remote control is from the original manufacturer ensuring that you are receiving a genuine product made for your FTX system.

Each remote has been tested, cleaned and inspected for proper operation. New batteries are installed also!

Made for the following FTX systems:

Programming:

  1. Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the successful completion of this step.
  2. Within a second after cycling the ignition for the 5th time, tap the Lock button once for a half second. The parking lights will flash once to confirm the transmitter has been coded.
  3. Exiting Programming: Programming is a timed sequence. If you can not get the remote(s) to program then the system enters Valet Mode. The parking lights will flash twice signaling the end of programming.