MOTUL NGEN 0W-8 HYBRID ENGINE OIL LUBRICANT JASO GLV-1 MAZDA TOYOTA 1L 111845
TYPE OF USE Synthetic bio-sourced "Fuel economy" engine oil specially designed for Hybrid Electric Vehicles (H.E.V) and Plug-in Hybrid Electric Vehicles (P.H.E.V) fitted with recent gasoline engines, turbocharged or naturally aspirated, direct or indirect injection, designed to use SAE 0W-8 oil with low friction and low HTHS (High Temperature High Shear) viscosity (1.7mPa.s). MOTUL NGEN HYBRID 0W-8 is especially formulated for the technical challenges imposed by Gasoline Hybrid cars, such as fuel dilution, water emulsion, high numbers of stop/start events and lower oil temperature conditions. This state-of-theart formulation is part of a whole new Motul sustainable concept as it contains 25% of Organic base (100% renewable plant-based synthetic base stocks) and is filled in a 50% recycled and 100% recyclable Motul can. This Organic base using non-fossil renewable materials is limiting the environmental impact and allows Motul to lower its carbon footprint by 25% during manufacturing. MOTUL NGEN is the common naming to qualify the sustainable ranges at Motul, using different technologies into the formulations and packaging to reduce its carbon footprint. This dedicated formula can also be used for gasoline engines requiring a viscosity grade SAE 0W-8 lubricant or a Fuel Economy lubricant in viscosity grade 8: Standard JASO GLV-1. MOTUL NGEN HYBRID 0W-8 is also suitable for battery electric vehicles (B.E.V) fitted with thermal gasoline engine used as Range Extender. Compatible with catalytic converters and particulate filters. This type of oil may be unsuitable for use in some engines. Refer to the owner manual if in doubt. PERFORMANCES STANDARDS JASO GLV-1 RECOMMENDATIONS MAZDA, TOYOTA The JASO GLV-1 standard is the first standard for ultra-low viscosity engine oil which is highly demanding on Fuel Economy performance without compromise on engine protection, including when using gasoline containing up to 85% Ethanol (E85). Viscosity grade SAE 0W-8 minimizes seriously lubricant hydrodynamic friction, allows maximum fuel economy benefits especially when the oil is cold. This ultra-low viscosity grade also improves oil flow at start up, delivers faster oil pressure build up, faster rev raisings and allows to reach operating temperature faster. MOTUL NGEN HYBRID 0W-8 is specially formulated to meet the specific challenges of hybrid electric vehicles, such as HEV, PHEV and BEV with Range Extender on which numerous and multiples unexpected stops and starts of the Gasoline engine are involved during the different operating phases of the hybrid vehicle. This particular mode of operation of the internal combustion engine on a hybrid vehicle generates very specific constraints for the lubricant such as fuel dilution, water emulsion, high numbers of stop/start events and working at lower oil temperature conditions which generate increased oxidation, and for that purpose, MOTUL NGEN HYBRID 0W-8 fully meets all these demanding requirements. Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions. ORGANIC BASE The Organic base using non-fossil renewable materials is limiting the environmental impact and allows Motul to lower its carbon footprint by 25% during manufacturing process. The specific Organic base of NGEN HYBRID 0W-8 enhances all conventional API criteria and requirements while bringing better engine cold start, reduced fuel consumption and improves oil consumption control. Compared to known criteria and requirements of the API SP and ILSAC GF-6B standards, but not yet applicable to the innovative viscosity grade SAE 0W-8, all these qualities, MOTUL NGEN HYBRID 0W-8 demonstrates them: RECOMMENDATIONS Drain interval: according to manufacturers recommendations and tune to your own use. MOTUL NGEN HYBRID 0W-8 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle. PROPERTIES Viscosity grade SAE J 300 0W-8 Density at 20°C (68°F) ASTM D1298 0.836 Viscosity at 40°C (104°F) ASTM D445 25.0 mm²/s Viscosity at 100°C (212°F) ASTM D445 5.2 mm²/s HTHS viscosity at 150°C (302°F) ASTM D4741 1.7 mPa.s Viscosity Index ASTM D2270 144.0 Pour point ASTM D97 -45.0 °C / -49.0 °F Sulfated Ash ASTM D874 0.75 % weight TBN ASTM D2896 7.0 mg KOH/g Flash point ASTM D92 224.0 °C / 435.0 °F
About Us
Our aim at World of Lubricant is to provide you with the best possible customer service and value for money.We are approved distributors of LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine.If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.
Payments
We currently accept PayPal payment.Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.
Shipping
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.The buyer is responsible for return postage costs.You can return a product for up to 30 days from the date you purchased it.Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Feedback
Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this.Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR.Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably.We will provide you with a positive feedback once we have received payment confirmation.The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance.
