Why Should You Choose This LAUNCH X431 IMMO PLUS?

• Read PIN/CS (All Keys Lo~st): LAUNCH X431 IMMO PLUS can read the PIN code from chips and allows the technician to perform necessary identification and checks. Compatible with Ford, GM, Chrysler, Dodge, Jeep, VW, Benz, BMW, Porsche, etc.
• IMMO Module Replacement: Replace the new IMMO module and relearn it with the vehicle. Compatible with BMW, Mercedes-Benz, VW/Au-di, Honda, Ni~ssan, Hyundai, Kia, etc
• Key Matching/Learning: Read key data to ECU module and reset/match the new key with IMMO ECU. Compatible with Ford, GM, Mercedes-Benz, BMW, VW/Au-di, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Ni~ssan, Hyundai, Kia, etc.
• Key Generation: Create or generate cryptographic keys used for securing and authenticating various functions within a vehicle's electronic systems.
• Remote Learning: Match remote data with vehicle IMMO system.
• Module Data Wiping: Clear key module information & data for matching new keys.
• IMMO ECU Reset: Reset the ECU with vehicle after replacement or repair.
• ECU Cloning: If the original ECU module can normally be activated, LAUNCH IMMO PLUS car key programming tool can clone/backup the original data and directly write it into the new module.
• More...

PROG 3 Key Programmer + IMMO PLUS Enhance More Key Programming Functions

• Read/Write Key EEPROM, MCU, Engine, Immobilizer

• LAUNCH X431 IMMO PLUS combines with PROG 3 to clone/backup the original data from the original engine & gearbox modules and directly write into the new module without troublesome steps. Widely applied to 5000+ types of vehicle gearbox & engine models and common brands such as Bosch, Continental, Siemens, Delco, Getrag, ZF, Temic, etc.

• For VW/Au~di: VW & Au-di Key Learning/All Lo~st; 5th-Gen. Au-di (0AW/0B5) Gearbox ECU Replacement; 5th-Gen. VW UDS Engine ECU Reading, Writing & Clone; 5th-Gen. VW/Au~di Bosch and Siemens Engine ECU Replacement; 4th-Gen. VW/Au~di Engine ECU Replacement; etc.
• For Benz: Mercedes-Benz Key Adding/All Lo~st; Mercedes-Benz IMMO ECU Data Wiping; Mercedes-Benz Infrared Key Reading/Writing; etc.
• For BMW: BMW Key Adding/All Lo~st; BMW CAS4/CAS4+ ECU Replacement; BMW E chassis 8HP Gearbox ECU Data Wiping; BMW Engine INS Code Reading; etc.
• For Porsche: Porsche Key Adding/All Lo~st; ECU Replacement
• 4th-Gen. Instrument + Engine Module: Key Learning/All Key Lo~st/Instrument Replacement/Engine Replacement; 4th-Gen. Comfortable Module + Engine Module: Key Learning/ All Keys Lo~st/ Engine Replacement; 4th-Gen. EZS/Kessy + Engine Module: Key Learning/All Key Lo~st; Engine Replacement; 5th -Gen Anti-theft System (A4/A5/Q5/A6/A7/A8): Key Learning/ All Key Lo~st/ Engine & Gearbox Replacement.

LAUNCH X431 IMMO PLUS: 39+ Maintenance Functions Take Care of All Troubles

• Oil Reset: Reset the oil life system and turn off the oil light after replacing the oil or oil filter to start a new cycle.
• EPB Reset: Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
• SAS Reset: Calibrate the steering angle after replacing the steering angle position sensor and the mechanical parts of the steering system, etc.
• Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
• ABS Bleeding: Bleed the air of a brake system to restore ABS brake sensitivity.
• Battery Matching: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information, and prevent the related control module from detecting false information.
• TPMS Reset: Quickly look up the tire sensor IDs from the vehicle’s ECU, and perform TPMS replacement and sensor test.
• Inje~ctor Coding: Code the inje~ctor after replacing or adjusting to correct the f~uel injection volume of each cylinder more accurately.

ECU Coding Allows You to Personalize The Vehicle Functions As Your Needs & Preference

• Component Matching: After replacing a new ECU module or an actuator, you can use the LAUNCH X431 IMMO PLUS OBD key programmer to match component control modules to make them work properly with the vehicle.
• Flash The Hidden Functions: LAUNCH automotive scanner is able to activate the hidden functions or deactivate the unneeded functions to meet users’ needs and increase income for repair shops. Examples as auto start-stop, tilt mirror reversing, foldable mirrors, interior lights customizing, buzz warning sound, daytime running lights, and changing brightness of daytime running lights.
• Online ECU Coding: Compatible with BMW, VW, Au~di, Skoda, Seat, Porsche, etc. This online coding allows you to access the online data from the OEM server to do module relearn/matching/coding for high-level vehicles.
• Online Calibration: Connect to the online server to perform a special adjusting function. Compatible with VW, Au~di, Skoda, Seat, etc.

All-System Diagnostics Scan Every System & Catch Every Fault Code

• View ECU Information: Include unit type, version numbers, and more specifications.
• Read Fault Codes: Read stored codes of the tested vehicle to locate vehicle problems.
• Clear Codes: Interpret code definition and help repair problems to turn off the MIL.
• View Live Data Stream: View live data to learn vehicle status and facilitate finding out problems.
• Active Test for narrowing diagnostic range and quickly pinpointing vehicle problems.

• For example, you can command the fu~el inje~ctors to pulse individually, engage specific sole~noids, operate relays, open and close val~ves, switch cylinder correction off/on, modulate throttle, operate compression test, or activate the cooling fan. This allows you to test the functionality of these components, identify faulty ones, and diagnose issues related to their operation.