Worm Drive Clamps W3 Stainless Steel Clamps
Item description
Thanks to the exclusive design of the housing, the ASFA-L W3 hose clip has excellent performance while being at the same time very compact.
Smoothed on the underside, combined with the bevelled
band edges, protects the hose from any damage.
The ASFA-L W3 hose clip complies fully with the din 3017
Key Points
- Material:
- Housing & Band: Stainless Steel X6Cr17 (AISI 430)
- Screw: Stainless Steel (AISI 304 CU)
- Size: 8mm-100mm
- Easy To Install
- Well known and credited brand
- Rolled edges to protect from hose damage
- Mechanical locking system improves effective tightening
Extra Tools
- Flexi Driver:
The Flexi Driver is an indispensable tool for installing clamps, thanks to its long reach and flexible neck. Please refer to the link below for more information on. - Flexi Driver Link
Selecting the correct size clamp:
- Accurately measure the OUTSIDE diameter of your hose / application.
- Select the Hose Clip which size range matches the OD of your hose.
- The outer diameter of the hose tends to increase when you push the hose onto a spout or connection.
- Size Example: If the hose is 57mm outside diameter use a 50-70mm clamp.
Applying the clamp:
- Make sure you have a Slotted Screwdriver or flexi driver and loosen the bolt enough to get over the pipe or hose.
- Slide clamp over hose.
- Connect hose to connector, make sure the connector is far enough in, tighten the bolt up firmly, do not exceeding the recommend torque.
- Test it's tight enough you're done
