Connection instructions:

HDMI cable: HDMI 1.4 (at 4K@30Hz), Preferably within 10ft.

Ethernet cable: Cat6/7 within 100m/328ft, Cat5e within 80m/262ft, Cat5 within 60m/200ft.

Ethernet cable RJ45 wiring sequence: T568B (white orange, orange, white green, blue, white blue, green, white brown, brown)

-

Remind:

1）Directly connect your signal source and monitor before connecting HDMI Extender, and check the signal status.

2）The red light is the power light, and the green light is the signal light. It is recommended to use 2 Ethernet cables for testing if there is no signal. If the red light is not on, please contact customer support by order number.

3）RJ45 requires the conventional T568B standard. Need to change the wiring sequence if you are using T568A.

-

How to set EDID:

If this device can't recognize your TV's EDID during the first connection, set the following settings please.

1）Connect the TV to the HDMI IN on Transmitter(TX).

2）Connect the power supply to Transmitter and turn on the TV.

3）Hold EDID button for 3-5 seconds. Green light stops flashing, indicating EDID copy is complete. Then unplug the hdmi cable and connect the device normally again.

-

Package Lists:

1x Transmitter

1x Receiver

2x Power adapter

1x User manual