HT-1934-3 Gas Soldering Iron Set Butane Cordless Welding Pen Torch Tool Kit

Specification:
Material: plastic + aluminum

Capacity: 12ml

Flame temperature: 1300℃

Ironing temperature: 450℃

Fuel used: butane and household lighters are common

feature:



4-in-1 Soldering Iron Kit.

Portable and wireless.

Fine workmanship and good performance.

Easy to use.

Easy to carry.

Built to last.

Suitable for welding, electronic repair, car repair, etc.





how to use:


 1. Push the switch to the ON position and hear a "click".

2. Use an igniter or lighter near the connector ignition.

3. Burn for 3 minutes after ignition and wait for the fire to go out. The soldering iron tip will continue to heat up.

4. Adjust the size of the flame, it is larger in the direction of 'ten' and smaller in the direction of 'one'.

5. The temperature is as high as 1300 degrees (iron temperature is 450 degrees), you should pay attention to safety when using it, and turn off the switch to the OFF position after use.

6. When using a soldering iron, pay special attention to wait until the flame is completely extinguished. When the object inside the soldering iron turns red, do it again.

7. The length of the flame is about 1.2-2.2 cm.





How to fill gas:



1. Confirm that the switch is OFF, then add.

2. The tank body can be introduced into the air hole and compressed under pressure.

3. Filling can be completed in about 10 seconds. Wait a few minutes for  stabilization, then use.

4. If it is filled and the tail has a "hissing" sound, gently press the tip of the pen into the air hole to remove it.

Package Included:
1 x Soldering Iron Tool (butane not included)

N   otes:
Does not contain Ga, please refill before use.

When filling with gas, the inlet is up.

After use, make sure the flame size switch is off and the flame goes out.

Keep the flames away from your body and clothing.

Stay away from children.

Avoid direct sunlight or store above 40 degrees.

Due to manual measurement, please allow 0-1cm error.

Due to different monitor calibrations, the colors of the items shown in the photos may appear slightly different on your computer monitor.