Integrated DC amplifier equipped with a new power linear circuit in a new class A amplifier. Equipped with Technics' original power linear circuit. Equipped with computer drive new class A system. After turning on the power, you can check the process until the circuit enters stable operation on the front panel display. The phono equalizer section has a high SN ratio by using an ultra-low noise FET. The main NF type (bass) and NF-CR type (treble) are used for the tone control circuit, resulting in a high signal-to-noise ratio.Effective output: 120W+120W (6Ω, 0.005%).Total harmonic distortion rate: 0.002%. Output bandwidth (THD 0.02%): 5Hz to 100kHz. Frequency characteristics: 20Hz to 20kHz +0 -0.1dB. 0.5Hz to 170kHz +0 -3dB SN ratio (IHF-A, straight DC): 104dB. Load impedance: main or remote:4Ω~16Ω.main and remote:8Ω~16Ω.Phono SN ratio/MM:88dB(2.5mV input)/MC:72dB(250μV input) Phono frequency response 20Hz~20kHz, RIAA ±0.5dB.Shelving tone :Bass: ±10dB (50Hz)/Treble: ±10dB (20kHz) Filter: Subsonic: 30Hz, -6dB/oct. Loudness control: +9dB (50Hz, Volume -30dB) Power supply: AC100V, 50Hz/60Hz. Power consumption: 193W. External dimensions: Width 430x Height 141.6x Depth 380mm. Weight: 10.7kg

CD, record MM, MC played with very good sound quality. The aluminum panels have a nice finish. It's surprisingly well made and easy to operate. It is a used item with many scratches, but the appearance is below average. The input display is peeled off and cannot be read. I pasted paper in two places. . It feels nice to turn the volume.

Lubricate the contacts and internal cleaning parts. The exterior has been briefly cleaned and each operating section has been inspected, and operation is stable.

●Works well. It will be handed over after the operation has been inspected.

●Please check the image for the condition of the main unit.

●It is everything that is shown in the image. There are no box instructions.