You may also like




Sde6d164e24464272a3e3769f4fa9fcc5o.jpg

Sacb9f32a31274b68bab18bba83b954c5t.jpg

                

Se3be6aa13f7149a289c7fd9b82d32dfeY.jpg


Introduction:

An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months; High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.



Features:

1. Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.

2. Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy;

3. Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months;

4. Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery;

5. 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone;

6. AUTO one-key test: Magic tool and essential function for test newbie;

7. Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime;

8. One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective;

9. Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free;

10. Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately;

11. One-click switching its Chinese and English language menu;

12. Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify;

13. Minimalist keyboard design simplify operation, convenient to use;

14. Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble;

15. Self-calibration function: free from level drift after long time unused;

16. Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test;

17. Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz;

18. Function of video help: scan code on back of machine to get help of video course;

19. The PC software supports windows7/8/10 32-bit and 64-bit.



Specifications:

ModelHantek2D72Hantek2D42Hantek2C72Hantek2C42
Oscilloscope Mode
Bandwidth70MHz40MHz70MHz40MHz
Channel2CH+DMM+AWG2CH+DMM+AWG2CH+DMM2CH+DMM
Horizontal
Sample Rate Range250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform Interpolation(sin x)/x
Record LengthMax. 6K for single-channel; 3K samples per dual-channel
SEC/DIV Range5ns/div~500s/div  1, 2, 5 sequence
Vertical
A/D Converter8-bit resolution,each channel sampled simultaneously
VOLTS/DIV Range10mV/div~10V/divat input BNC
Bandwidth Limit, typical20MHz
Low Frequency Response (-3db)≤10Hz at BNC
Rise Time at BNC, typical≤5ns
DC Gain Accuracy±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
Note: Bandwidth reduced to 6MHz when using a 1X probe.
Acquisition
Acquisition ModesNormal
Trigger
TypeEdge
ModeAuto, Normal, single
Level±4 divisions from center of screen
Trigger Level Accuracy0.2div × volts/div within ±4 divisions from center of screen   
SlopeRising, Falling, Rising & Falling
SourceCH1/CH2
Input
CouplingDC, AC or GND
Input Impedance, 25pF±3 pF, 1MΩ±2%
DC coupled
Probe Attenuation1X, 10X
Supported Probe Attenuation Factors1X, 10X, 100X, 1000X
Maximum Input Voltage150VRMS
Measurement
CursorVoltage difference between cursors: Delta V
Time difference between cursors: Delta T
Automatic MeasurementsFrequency, Amplitude
Arbitrary Waveform Generator Mode(Only for Hantek2D42 and Hantek2D72)
Waveform FrequencySine: 1Hz~25MHz          -          -
Square: 1Hz~10MHz          -          -
Ramp: 1Hz~1MHz          -          -
EXP: 1Hz~5MHz          -          -
Sampling250MSa/s          -          -
Amplitude2.5Vpp(50Ω)          -          -
5Vpp(High impedance)          -          -
Frequency Resolution0.10%          -          -
Channel1CH waveform output          -          -
Waveform Depth512Sa          -          -
Vertical Resolution12 bit          -          -
Output Impedance50 Ω          -          -
DMM Mode
Maximum Resolution4000 Counts
DMM Testing ModesVoltage,Current,Resistance,Capacitance,Diode &On-Off
Maximum Input VoltageAC:600V, DC: 800V
Maximum Input CurrentAC: 10A, DC:10A
Input Impedance10MΩ
Measurement TermRangeAccuracyResolution
DC Voltage400.00mV± (0.8% + 5)100uV
4.000V1mV
40.00V10mV
400.0V100mV
600.0V± (1% + 2)1V
Overload protection: 400mV: 250V, other: 600Vrms.
AC Voltage4.000V± (1.2% + 5)1mV
40.00V10mV
400.0V100mV
600.0V±(1.5% + 5)1V
Frequency: 40Hz~400Hz;
Frequency of 400V and 600V: 40Hz~100Hz
DC Current40.00mA± (1% + 2)10uA
200.0mA± (1.5% + 2)100uA
4.000A± (1.8% + 2)1mA
10.00A± (3% + 2)10mA
Overload protection: 
self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
AC Current40.00mA± (1.3% + 2)10uA
400.0mA± (1.8% + 2)100uA
4.000A± (2% + 3)1mA
10.00A± (3% + 5)10mA
Frequency: 40Hz~400Hz;
self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
Resistance400.0Ω±(1% + 3)0.1Ω
4.000KΩ±(1.2% + 5)1Ω
60.00KΩ10Ω
400.0KΩ100Ω
4.000MΩ1KΩ
40.00MΩ± (1.5%±3)10KΩ
Overload protection: 220Vrms
Capacitance40.00nF±(3% + 5)10pF
400.0nF100pF
4.000uF1nF
40.00uF10nF
100.0uF100nF
Overload protection: 220Vrms
Diode0V~2.0V
On-Off<50Ω
General Specifications
Display
Display Type2.8 inch64K color TFT
Display Resolution320 horizontal by 240 vertical pixels
Display ContrastAdjustable
Power Supply
Supply Voltage100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
Power Consumption<2.5W
FuseT, 3A
Battery2600mA*2
Environmental
Operating Temperature0~50 °C (32~122 °F)
Storage Temperature-40~+71 °C (-40~159.8 °F)
Humidity≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling MethodConvection
AltitudeOperating and3,000m (10,000 feet)
Nonoperating
Mechanical ShockRandom Vibration0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis
Nonoperating2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis
Operating50g, 11ms, half sine
Mechanical
Dimension199 x 98x 40mm (L x W x H)
Weight624g



Shipping:

This product is shipped via standard shipping/Expedited Shipping(option).

Please allow 5 business days for handling time of the item before it is shipped.


Payments:

We accept payment via Credit Card、Debit Card、Apple Pay、Google Pay or PayPal etc.

Payment must be sent within 4 days of auction end.


Returns:

We have a 30 days full refund policy and buyer pays for return shipping(unless product is defective).

Buyer must contact us before returning an item.


Feedback:

We will leave positive feedback for each buyer after the transaction is completed.

We strive to maintain the best customer satisfaction, if you are satisfied with the receipt of your package please leave us a positive feedback as well.

If for any reason you are not satisfied with the product you receive, please feel free to contact us to address the issue. We will ensure that you are satisfied.


Customs duty/Tax:

Import duty taxes are not included in the price of the item or in the shipping cost, and if additional duty charges are incurred, they will be borne by the buyer.