eBay

We like to think of our SuperNode as the multi-tool of lighting. It connects to a WiFi network and supports many configuration protocols: the builtin website (also available from Android and iOS), ArtNet, E1.31 sACN, DMX Input, multi-Node sync, Alexa voice assistant, MQTT and Home Assistant and Philips Hue.

Three LED strip ports (2x 3-wire and 1x 4-wire) can drive more than 1000 LEDs in total, on individually addressable LED strips, such as SK6812, WS2812 and APA102. Two standard 3-pin fully isolated DMX512 ports can drive any standard lighting fixtures which can be handled just like LEDs by the builtin WLED software. Our SuperNode can be configured with a mix of LEDs and DMX fixtures.

The DMX support is completely re-written from the standard WLED software and uses a fully hardware accelerated driver for ultimate reliability and performance.

ArtNet, sACN and DMX In can be used to drive the connected lighting in one of the following modes: single colour, drive each LED/fixture separately, choose from more than 100 effects, configured presets or a passthrough mode.

Passthrough can operate in two ways: from physical DMX In to ArtNet, or from ArtNet/sACN to DMX outputs. The latter mode operates dynamically, so that as soon as data stops arriving, the ports fall back to the configured WLED effect.

Also supports 2D LED matrices with builtin effects.

USB-C 5V power socket (power delivery not supported; external power required for LEDs)
3D printed enclosure
Port A: 3-pin female fully-isolated DMX512 socket supporting DMX In or Out
Port B: 3-pin female fully-isolated DMX512 socket supporting DMX Out only
2x 3wire (data-only) LED strip JST SM male sockets (mode for Port A or B)
Port C: 4wire (data & clock) LED strip JST SM male socket
3x Internal WS2812B port status LEDs (Port A & B plus device status)
Custom modified WLED v14.1 software build
ArtNet or sACN passthrough to DMX Output
DMX Input to ArtNet passthrough
Up to 5 DMX fixture maps supported
More than 1000 LEDs supported
Power: 1.25W (~250mA) (not including external LEDs)
Dimensions: 112mm x 64mm x 46mm high
2.4GHz 802.11b/g/n WiFi Access Point and Client modes (20MHz bandwidth only)
Most documentation available on the WLED site: kno.wled.ge

Power supply, LEDs, DMX fixtures and cables not included.

See racitup dot com for further information