TRiX carbon Fibre Radiator Diverter For Gen 1 Mini R50 and R53

 

The TRiX Radiator Diverter is made from 100% Genuine Carbon Fibre with a clear gloss coating and is NOT the cheaper carbon effect. This our own design. We used a M7 one as a guide and made modifications to it to suit our needs. This has been made to channel as much airflow through the radiator on all Gen 1 Minis.

The gap between the bumper and the radiator allows air to flow in all directions and at times the air can arc over the radiator rather than go through it.  This diverter stops that from happening by channeling the air only through the radiator. This leads to lower operating temps. The car will stay cooler for longer and it also makes the cooling fans more efficient.


We designed these to work with the OEM rad and also the Fletcher Alloy Rad. The cooling temps on our demo car were so greatly improved that we didn’t feel the need to use the alloy rad any more and have reverted back to OEM.

 

We have only made a few of these so we could trial it on our demo car, so this isn’t a line we expect to stock indefinitely. If it is something owners like to see then let us know and we can continue to produce it.



Product Description

Material: Gloss coat Carbon Fibre.
Colour: Gloss finished carbon weave.
Fitment:

 It will fit the following model Gen 1 Minis with an aftermarket OEM or Aftermarket Alloy Radiators.

Features

·      100% Genuine Carbon Fibre.

·       Cosmetic improvement.

·       Better air flow to the Radiator.

·       Simple bolt on or bond on application.

·       Reduced operating temps.

·       Makes the cooling system and fans more efficient.

 

 

Fitting instructions

This is a moderately easy item to fit if you have the tools. Bolting or bonding the TRiX Radiator diverter plate to the bumper and fitting the foam (optional) around the outer edge.

Although this is a relatively easy job which should take no longer than 10 minutes to fit. If you are not confident, or don’t have the necessary tools, we always recommend professional installation as no instructions are included.

Please contact us if you require fitting, or fitting instructions.

Bolting the diverter to the bumper mount with 13mm bolts and washers with self tapping screws (included)

Bonding the diverter to the bumper with Epoxy or similar adhesive.

All fitting hardware is included so the decision is yours.

 

Please not. If bolting this on, you may need to adjust or use washers to allow the mounting points to attach without cracking. We have fitted a few of these and sometimes they go on perfectly, but if you have ever had your front bumper off it may not have gone back in the same position so this may sit funny unless spaced out. Or the mounting points adjusted.


Even so, it is a very easy item to fit and adjust. Again, contact us if you are having any issues and we will be happy to help out

 

 

Whats in the box?

1 x TRiX Radiator Diverter in genuine Carbon Fibre.

2 x washers.

2 x 13mm bolts.


We sell many Carbon Fibre parts for Minis. Including fenders, scuttle vents, scoops, Spoilers, handbrakes, gearknobs and others. We also make everything on site, so let us know if you need something bespoke made.

Check out our store for more cool stuff.

 

 

PLEASE NOTE.


The delivery dates are estimated by the courier company and we have no liability over late deliveries. If you require quick delivery please select a next day service at checkout.
We also reserve the right to partially refund any returned items as a restocking fee and returns of damaged items are not accepted, and will not be refunded. Please seek professional fitting if you are not confident.