Output Table Supporting Bearing | Deep-Groove Ball Bearing |
Permissible Torque | 7.9 lb-in |
Inertia | 24 oz-in² |
Permissible Speed (r/min) | 200 |
Gear Ratio (X:1) | 18 :1 |
Max. Holding Torque | 3.9 lb-in |
Resolution (Resolution Setting: 1000 P/R) | 18000 P/R (0.02º) |
Power Supply | 24 VDC |
Input Current | 0.90 A |
Shaft | Single |
Electromagnetic Brake | Not Equipped |
Repetitive Positioning Accuracy (arc sec) | ±15 arc sec (±0.004º) |
Lost Motion | 2 arc minute (0.033°) |
Angular Transmission Accuracy | 4 arc minute (0.067º) |
Permissible Thrust Load | 22 lb |
Permissible Moment Load | 17.7 lb-in |
Runout of Output Table Surface | 0.0012 in. |
Runout of Output Table Inner (Outer) Diameter | 0.0012 in. |
Parallelism of Output Table | 0.002 in. |
Degree of Protection | [Actuator] IP40 (IP20 for motor connector)[Driver] IP20 |
Insulation Class | 130 (B) |
Insulation Resistance (Actuator) | 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor and Sensor Windings |
Dielectric Strength (Actuator) | No abnormality is found with the following application for 1 minute: Case - Motor and Sensor Windings 1.0 kV, 50 Hz or 60 Hz |
Ambient Temperature (Actuator) | 0 ~ +50ºC (+32 ~ 122ºF)(non-freezing) 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) when home-sensor set (accessory is attached) |
Ambient Temperature (Driver) | 0 ~ +50ºC (+32 ~ +122ºF) (non-freezing) |
Ambient Humidity | 85% max. (non-condensing) |
Operating Atmosphere | Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
Safety Standards | CE |
RoHS Compliant | Yes |
Components | ARD-K (Driver)DGM60-ARAK (Actuator) |