Original keyring loop is broken off – a hole has been drilled to securely hold a keyring

Remote’s Button Graphics are faded – see photo

Stock Photo

See pictures for an example of what you will receive.

One (1)

Aftermarket Security Installed System remote

 keyless entry fob alarm controller

Transmitter control clicker keyfob controller replacement Marksman / Autopage / Car Pro

 

FCC ID: H50T14 H5OT14

Part #: XT-35

ONE WAY TRANSMITTER

LED Light Color:  Red

Buttons: 3; Lock, Unlock, Trunk

Frequency: 311 MHz

Battery: 1; GP23A

See Item Specifications for more details

 

Compatible with the following Aftermarket installed security systems:

CPX-2500

CPX-2600

CPX-3500

 CPX-3600

 

 

Programming Instructions:

NOTE:  This security system will only retain the last 4 remote transmitters programmed.  If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order.

1.     Disarm the system

2.     Open the door and keep the door open

3.     Turn the ignition key OFF / ON 6 times, keep at ON position at 6th time switching

4.     Within 15 seconds press and hold any button for transmitter code learning, a long chirp confirm transmitter programmed

5.     Apply steps 4 - 5 to program 2nd, 3rd and 4th transmitter

Exit:  Turn the ignition OFF, 3 long chirps confirm exit.

 Or

In the event, you should need to add or replace a transmitter, it is important that you follow the  instructions below.

Note: Each step must be performed within 10 seconds of the previous

step otherwise the system will exit the programming mode.

1. Enter:

a. Turn the ignition key to the “ON” position

b. Push the valet switch 6 times. There will be 2 long chirp and 1

short chirp

c. You are now ready to program the transmitter(s).

2. Programming the transmitters:

a. Press any button on the first transmitter. There will be 1 short chirp.

b. Within 10 seconds push any button on the second transmitter. There will be

2 short chirps

3. Exit:

a. Turn the ignition key to the “OFF” position, Or

b. Leave for 10 seconds; there will be 3 long chirps to confirm exit.

Note: The system will allow programming of 4 transmitters. If more than 4 transmitters

are programmed, the system will only keep the last 4

 

 

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

 

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

 

 

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days. 

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:  

  1. We have a 30 day return policy. 
  2. All returns for replacements and refund need an RMA #.
  3. Please contact us before returning items so we can give you the RMA # and the proper return address.
  4. No refunds / replacements will be granted without an RMA# 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


.
.
.
.
.
.