• Features:
  •  
  • 4x Hood+Trunk For Dodge Dakota 2005-2010 Ram Dakota 2011 Gas Struts Lift Support

    Features:

     

    • Black Nitride Rod: Corrosion resistance ensures the rod does not become contaminated with rust, which reduces sealing effectiveness and life
    • Superior Sealing: Smooth finish, robust guide/seal pack is low wear with high sealingintegrity – through all seasons for consistent performance 
    • Anti-Spin Fittings: End fittings are secured with thread-lock to ensure they do not become partially unseated before installation
    • Low Wear Piston: Highly durable O-Ring sealing with an engineered polymer guide effectively separates the chambers of the body for a long service life and reliable performance
    • Precision Tube: Precision tube provides smooth and constant contact with the piston assembly - reducing wear while maintaining lifting performance over time

     

    Description:

    Vehicle Location : Hood+Trunk

    Quantity: 4Pcs Gas lift supports shocks struts

    Type:Struts

    Condition: New

    Material: Steel

     

    Application For:

     

    For Dodge Dakota 2005-2010,

    For Mitsubishi Raider 2006-2009,

    For Ram Dakota 2011

     

    NOTE: To Confirm that this part fits your Vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the Notes section in the compatibility chart for additional specifications about this part.

     

    Follow the steps for easy installation:

     

    • Firstly, remove the old hatches, hoods, trunk lids, etc. using a screwdriver, protective gloves, and other basic tools.
    • Then, remove the clips carefully and unbolt the fasteners.
    • Pull off the ball joint and remove the strut from your vehicle.
    • Finally, place the new strut in the correct position and tighten down the fasteners as per need.

     

    Keep the following in mind when working with Gas struts:

    • Never apply heat to gas struts. The tube containds gas under high pressure. 

     

    • Never dispose of gas struts in fires. This can cause them to explode

     

    • Protect struts against over-extension, side loading and excessive heat.

     

    • Never over extend a strut. Over extending can cause damage to the internal mechanism of the spring. 

     

    • Do not puncture or crush pressurised struts. Always ensure proper and safe disposal of the gas strut.

     

    The Lift Supports are backed with 1 year warranty.

     



    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.
    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Contact Us
    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Shop Category
    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    4x Hood+Trunk For Dodge Dakota 2005-2010 Ram Dakota 2011 Gas Struts Lift Support

    Features:

     

    • Black Nitride Rod: Corrosion resistance ensures the rod does not become contaminated with rust, which reduces sealing effectiveness and life
    • Superior Sealing: Smooth finish, robust guide/seal pack is low wear with high sealingintegrity – through all seasons for consistent performance 
    • Anti-Spin Fittings: End fittings are secured with thread-lock to ensure they do not become partially unseated before installation
    • Low Wear Piston: Highly durable O-Ring sealing with an engineered polymer guide effectively separates the chambers of the body for a long service life and reliable performance
    • Precision Tube: Precision tube provides smooth and constant contact with the piston assembly - reducing wear while maintaining lifting performance over time

     

    Description:

    Vehicle Location : Hood+Trunk

    Quantity: 4Pcs Gas lift supports shocks struts

    Type:Struts

    Condition: New

    Material: Steel

     

    Application For:

     

    For Dodge Dakota 2005-2010,

    For Mitsubishi Raider 2006-2009,

    For Ram Dakota 2011

     

    NOTE: To Confirm that this part fits your Vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the Notes section in the compatibility chart for additional specifications about this part.

     

    Follow the steps for easy installation:

     

    • Firstly, remove the old hatches, hoods, trunk lids, etc. using a screwdriver, protective gloves, and other basic tools.
    • Then, remove the clips carefully and unbolt the fasteners.
    • Pull off the ball joint and remove the strut from your vehicle.
    • Finally, place the new strut in the correct position and tighten down the fasteners as per need.

     

    Keep the following in mind when working with Gas struts:

    • Never apply heat to gas struts. The tube containds gas under high pressure. 

     

    • Never dispose of gas struts in fires. This can cause them to explode

     

    • Protect struts against over-extension, side loading and excessive heat.

     

    • Never over extend a strut. Over extending can cause damage to the internal mechanism of the spring. 

     

    • Do not puncture or crush pressurised struts. Always ensure proper and safe disposal of the gas strut.

     

    The Lift Supports are backed with 1 year warranty.

     



    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Copyright of Auto_EngineParts. All rights reserved.