ViewSonic Projector Wall Mount (projector is not included - it is in the pictures as an example). With adjustable mounting arms, the wall mount will fit a wide variety of projectors and is designed for ViewSonic Ultra Short Throw projectors. With an easily removable mounting plate, it is easy to install and adjust. You can fine tune the vertical tilt, horizontal roll, and horizontal tilt with the turn of a knob for a perfect picture every time. 
Wall Mounting
  • The bracket is suitable for concrete wall mounting or wooden stud wall.
  • Concrete wall mounting thickness must be a minimum 4” (100mm). Anchor bolt and screw (M6 × 55) are needed to be used for concrete wall installation.
  • Dry-wall wall thickness must be a minimum 4.5” (114mm). Only screw (M6 × 55) is needed to be used for installation, and gypsum board thickness less than 0.59" (15mm).If the wall is not strong enough, reinforce it sufficiently before installation.
  • This unit does not include the hardware needed to install in your wall. Please ensure you have what is needed to proper and safe installation. 
For ViewSonic projector models:
  • PX800HD
  • PS700X
  • PS700W
  • PS750X
  • PS750W
  • PS750HD
  • LS810
  • LS820
  • LS830
Also works with a wide variety of other projectors including long throw, medium throw, short throw, and ultra short throw protectors from ViewSonic and other brands. Because the four mounting arms are adjustable, it will fit most models once adjusted. Please see the instructions and pictures included to see if and how your model could fit.