Custom transmission mount for the 89-93 Dodge Ram W250/W350 that has been converted to a manual NV4500 transmission. Made of a combination of 10 ga. lower bracket w/dimple die for reinforcement, 1/4" base and 3/16" upper mount (2Pcs total INCL. BUSHING MOUNTS).  This mount is for anyone who plans or has upgraded their transmission to the NV4500 4WD for the 1st Gen Dodge.  This custom mount will center the weight of the transmission with T-case on the mount and again is strengthen with dimple dies.  This will come in raw steel, no logos and will include the bolts, washer and nuts for it including upper and lower bushings.  ***To install you will need to remove the top plate of your existing transmission crossmember by cutting off the rivets and this will take its place and secured by the nuts and bolts provided***.   (If your crossmember does not have the upper riser on your crossmember please let me know and I will get you the correct height for the upper mount).  If you have any questions about this part please ask.  Will not fit the 2WD crossmember, must be a 4WD crossmember from a W250/W350. May be compatible with Ram Chargers.  Please ask questions and I can verify dimensions with you.  I have several ready and ship twice a week, just let me know.  Pics are for illustration use and gives and idea of what and where the part is used.  Design may vary in the future if needed to improve on part if needed.  ONLY THE 2 PARTS IN RED (WITHOUT LOGO) ARE THE ITEMS FOR SALE, BUSHINGS INCLUDED.  (Actual crossmember is not included).  Offers accepted, worse I can do is decline however this is a great design and MADE IN THE USA! 

Thanks for looking