Huina 1572 Crane Boom Extension Upgrade.
This is a RC Crane Boom Extension. 3D Printed as a One Whole Piece and is Ready to screw straight in.!
This if for the Huina, WL Toys and Double E Cranes or similar. Message us if you have crane and want to check it’s compatibility.!
This Boom Extension is approximately 210mm (approx 21cm, 8.1inches).
These can continuously connected. Put 2 together and the crane will be just under 1 meter tall.!
You could add 6 or more together if you really wanted too.! Just note that after 2 or more of these Boom extensions. Extra weight in the crane would be required to hold the crane down.
Please see our listing for the Huina 1572 Crane Counter Weight. To add extra weight to the crane.!
This Crane Boom Extension is definitely the best upgrade available for the Huina 1572 Crane to date.!
This is Our new Version. It’s full Exoskeleton on all 4 sides..! It’s absolutely stunning and looks as if it were straight out of the factory and part of the machine.!
We still have our listing for the original version, which has 2 solid sides and 2 exoskeleton sides. The original version is likely stronger and less likely to flex. However for just a a couple these definitely look the part.! 😎
We found no difference in 1, 2 or even 3 extensions. However the full exoskeleton started to slightly flex with 4 extensions. So 4 would be max we recommend with this model.
You could definitely try more and rig the boom up a little tighter. We have got 7 on our crane with the original model and it would still take more.! So this is all up to personal preference..! 😎💪
3D Printed PLA+. The best you can buy. All plastic bought from JayCar. Not cheap printer plastic.! PLA+, so No warping and No flexing in the sun.!
These are printed by RC Enthusiast for RC/Scale Enthusiast.!
Strong sturdy design and print.! They are 100% infill and printed with base supports for extra strength.! 💪 NO Short Cuts..!
These take nearly 15 hours each to print.. Usually we have a couple ready to go. However please allow at least 2-3 days for us to produce these for you once ordered.
Lots of Colours to choose from. If you would like a colour that is not listed. Please contact us first. Colour Choice is Free.
Colours: Blue, Yellow, Green, Orange, White and Black. Black or Dark Grey is the standard colour sent, unless otherwise requested.
Condition is “New”. Sent with Australia Post Standard Parcel for Free. Or Express post at slight postage cost and Australian Post to DHL 10-12 days total for world wide shipping.!
I’m not making a living out of these. It’s Just a hobby enthusiast, helping out other hobby enthusiasts. I 3D print everything myself and everything is checked all over to make sure it’s perfect. Any imperfections and I make another. I only send out great quality items.
Misprints I usually keep for myself. 😉
Now I’d like to offer my experience and services in Australia at the same cost as buying them internationally. But don’t wait for shipping.! But now we sell these World Wide. Cheap, Fast and Tracked Shipping. Australian Made 🇦🇺. We have sold more than 100 of these World Wide Now