![](https://buyyou.net/cbe/data/prd/022/998/QQ截图20170725133912.jpg)
TECHTONGDA®
Counter 220V Cake Display Cabinet 102L 225W LED Digital Controller Refrigeration
|
The Air Patenting Cake Display Cabinet is designed with a trend of hoover flair and unique style. The cabinet structure features a contact box that enhances visual display. The refrigeration compressor offers advantages such as small noise, low power consumption, fast cooling, sterility, and temperature uniformity.
- Attractive interior LED lighting
- Digital temperature controller and display
- Front-facing glass with glass windows on both sides
- Heating wire defogging glass
- Equipped with rear sliding door
Capacity |
102L |
Shelf Size |
30.3*9 Inch (77*23cm) / 30.3*7.48 Inch (77*19cm) |
Ambient Temperature |
35.6℉-46.4℉ (2℃-8℃) |
Power |
225W |
Voltage |
220V |
Refrigerating Fluid |
R290 |
Refrigeration Size |
35.43*19.3*30.3 Inch (90*49*77cm) |
Note: The ambient temperature is measured at room temperature and humidity are 23℃ and 50% when the machine has been working for about 4 hours.Depending on the working environment, we only guaranteed that the ambient temperature within the temperature range and DO NOT guaranteed reached minimum temperature.
Products cannot be placed on the air inlet duct and the air outlet duct. Placing products will easily block the air duct. No air will cause the evaporator to freeze and block. The temperature of the cabinet is too high, which is higher than the normal temperature range displayed on our website.
The cooling of the machine is normal when the machine temperature is in the range of 2℃-8℃.
1. Please do not turn on the defogging switch frequently (turn it on when there is fog, and turn it off when there is no fog). Frequent turning on may cause the temperature to remain high.
2. Please be sure to clean the radiator once a month or so to improve the cooling speed.
3. Do not block the air inlet of the return air outlet in the cabinet and the cooling air outlet outside the cabinet.
4. The intelligent temperature control has been adjusted accurately before shipment, do not adjust it without authorization, please contact us if necessary.
5. When the machine is cooling, a small amount of fog will appear in the cabinet for a short time when the cabinet door is opened. This is a normal phenomenon, and it will disappear after closing the cabinet door for about a minute.
6. The defogging function is the electric heating defogging of the three-layer glass of the front glass, which basically does not fog. The side glass door and the rear door glass are double-layer insulating glass, and occasionally there will be a small amount of fog when the weather is humid. This is a normal phenomenon, and this phenomenon will disappear when the air conditioner is turned on or the air flow is accelerated.
1. When handling, the box should be kept as straight as possible, the maximum inclination should not exceed 45 °C, and it should not be placed upside down or horizontally;
2. Placement of the freezer: It should be placed in an environment with smooth air, cool and dry, and no corrosive gas around it. Remember to be close to the heat source and avoid direct sunlight. The front and rear of the cabinet should be kept more than 10cm away from the wall. The cabinet is stable to avoid vibration or excessive noise;
3. The frozen storage time of food is limited and cannot be stored for a long time, otherwise the freshness and moisture will be lost. Food should be placed in the cabinet with a certain distance to facilitate smooth air and uniform temperature;
4. The freezer can be turned on after 5 minutes of installation and shutdown. Do not turn it on after it has been shut down. For the first use or after a period of shutdown, the empty cabinet should be run for about 2 hours, and then put in food;
5. Defrosting: When the frost layer is more than 5mm thick on the surface of the freezer evaporator, it will affect the cooling effect and must be defrosted in time. When defrosting, the power supply should be cut off. Open the door and use the ambient temperature to defrost; if you need to speed up the defrosting, you can put an appropriate amount of hot water into the box to defrost.
Notice. Never use sharp metal tools to remove the frost layer!
6. The fresh-keeping work surface should not be hit with hard force or cut with sharp objects, such as knives and forks, otherwise the work surface will be damaged.
7. If the ambient temperature is high, there may be dewdrops on the outside of the box. This is a normal phenomenon. Please dry it with a soft dry cloth in time.
8. In order to save electricity, the number of opening doors should be minimized and the opening time should be shortened.
9. Please clean the oil and dust on the condenser and fan regularly to ensure energy saving and the best cooling effect.
Air patenting Cake Display cabinet application for store, supermarket, hotel, market, ect. It also can extend display cycle of vegetable, food, beverage, cooked food, candy, cake, cosmetics.
|
Shipping & Handling Details |
Default Shipping Cost or Free Shipping Information:
▲ Default
shipping cost or free shipping service is only for the customers
from Canada or the lower 48 United States by Canada Post, USPS or
the UPS Ground. Customers from other areas or needs other shipping
ways, please contact us.
▲Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,
Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there
WILL be extra shipping costs, please contact us for more detailed
information.
▲ Please
make sure your address is valid for both UPS and USPS services. Any
costs incurred because of incorrect or undeliverable address should
be undertaken by buyer.
Handling Time: Shipping
is usually made in 1-3 business days after payments cleared. Orders
are processed from Monday-Friday; Not on the weekends & public
holidays.
Sales tax / Customs
duties: Any
sales taxes or Customs duties are not included. If came out, they
must be undertaken by the buyer.
Damage In Shipping: Email
or call us First! We will work with you to get the case resolved in
the fastest method. |
Return /
Refund |
If you are not 100% happy with your purchase, please
contact Us. Please don't directly opened a request or case without
informing us, or else, we will do some discounts on the warranty
and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲ All
returns must be made within 14 days of delivery date. Items must be
in new, unused condition, with all original materials included with
the shipment. A partial refund may be applied for opened or damaged
items, depending on the condition.
▲ Items
returned under the buyer's remorse: The return shipping fee must be
covered by the buyer; The original shipping cost will also be
deducted from the refund. 15% restocking fee of the items purchase
price will be charged.
▲ Returns
that are the result of our seller's error: Buyer will receive a
full refund of the item as well as shipping charges
▲ All
returns require a RA (Return Authorization) number that will be
given by our seller. Please contact with us at first for more
details.
Defective & Damaged Products
▲ If
product was received damaged or not as described, please send us
some pictures or videos, so we could well understand your problem,
then solve them for you ASAP. Besides, it's much helpful for us to
claim with UPS, remind our related department to pay much more
attention to packaging later on. Hope for your understanding.
▲ Replacement
or refund of defective or damaged products can only be returned in
exchange for the exact same product, or else, the purchase price
will be refunded back to your original payment method.
▲ If
an item is received damaged, customer service must be contacted
within 7 days of receiving your item. All returns require a RA
(Return Authorization) number as above. |
Payment |
eCheck Issues: Payments via
eCheck do not clear immediately. Usually you will wait 5-7 days
after checkout for it to clear. Then we will arrange shipments
for you.
|
Warranty & Feedback |
▲ 6
months' warranty for the machines, not for the consumables. We
stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical
support from us with low cost.
▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller.
▲ We
committee to the customer satisfaction and want to bring you the
best purchase experience. If there is any problems, please contact
us ASAP. If not, please leave us a positive feedback as it's very
important for us. Thanks very much. |
|
|
|
|