250x M2/3/4/5 Fingerhut 6 Schlaufensatz für 1/16" - 3/16" Drahtseilkabel
250Pcs M1.5/2/3/4/5 304 Stainless Steel Thimble and 6-Size Aluminum
Crimping Loop Sleeve Assortment Kit for 1/16" - 3/16" Diameter Wire Rope
Cable Thimbles Rigging
Features:
High-quality
materials, strong and durable, anti-rust and anti-corrosion, smooth and
burr-free, flat cut surface, aluminum, light weight, easy to deform so
that it is tightly combined with the steel wire rope
Solid structure, strong bearing capacity, not easy to deform.
Product introduction:
(1)
The wire rope sling loop, also known as the heart ring, has a rope
groove for the end of the rope to be wrapped around and tied to prevent
excessive bending and wear of the rope, and can be connected to other
components of the heart-shaped metal ring.
(2) Figure 8 aluminum
sleeve: used to fix the ends of the wire rope for fastening connection.
The wire rope passes through the hole in the middle of the figure 8
aluminum sleeve and then string back, and then clamp it with a vise and
other tools.
Description:
1. Product material: stainless steel 304, aluminum
2.
Product attributes: wire rope sling loop is also called heart ring,
steel wire rope aluminum sleeve, also called figure 8 aluminum sleeve
3. Production process: casting, bending, stamping
4. Surface treatment: polishing, shock light
5. Interface type: ring, with rope groove, figure 8
Specification introduction:
Heart ring M1.5-rope groove 2.72MM, outer length 18MM, suitable for steel wire rope 1.5mm;
Heart ring M3-rope groove 4.4MM, outer length 23MM, suitable for wire rope 3mm;
Heart ring M4-rope groove 5.3MM, outer length 26MM, suitable for steel wire rope 4mm;
Heart ring M5-rope groove 6.4MM, outer length 32MM, suitable for steel wire rope 5mm;
Figure 8 aluminum sleeve 1.2MM-inner height 1.6MM, length 9MM, suitable for steel wire rope 1.2mm;
Figure 8 aluminum sleeve 1.5MM-inner height 1.98MM, length 9MM, suitable for steel wire rope 1.5mm;
Figure 8 aluminum sleeve 2MM-inner height 2.6MM, length 9MM, suitable for steel wire rope 2mm;
Figure 8 aluminum sleeve 2.5MM-inner height 3MM, length 12MM, suitable for steel wire rope 42.5mm;
Figure 8 aluminum sleeve 3MM-inner height 3.4MM, length 14.1MM, suitable for wire rope 3mm;
Figure 8 aluminum sleeve 4MM-inner height 4.7MM, length 16.3MM, suitable for steel wire rope 4mm;
Fitment:
Scope
of application: ships, docks, ports, industrial machinery, home
outdoor, electrical equipment, marine and land transportation, forestry
machinery, etc.
Package Included：
Heart ring: M1.5*10pcs, M2*10pcs, M3*10pcs, M4*10pcs, M5*5pcs
8-character aluminum sleeve: 1.2MM*65pcs, 1.5MM*50pcs, 2MM*45pcs,2.5MM*20pcs, 3MM*10pcs, 4MM*15pcs
Precautions for installation:
(1) The shackle should be smooth and flat, and no defects such as cracks, sharp edges, overburning, etc. are allowed.
(2) It is strictly forbidden to use cast iron or cast steel shackles.
The buckle body can be forged with killed steel, and the shaft pin can
be machined after forging from bar material.
(3) The shackle
should not be drilled or welded to repair. After the buckle body and the
shaft pin are deformed, no repair is allowed.
(4) The buckle
body and the bolt should be checked during use, and there should be no
serious wear, deformation and fatigue cracks.
(5) The lateral
spacing must not be subjected to tension during use, and the safety pin
must be inserted into the shaft pin.
(6) After the shaft pin is
correctly assembled, the width of the buckle body must not be
significantly reduced, and the threaded connection is good.
(7) First use a suitable aluminum sleeve for the thickness of the wire rope, such as M2 for 2MM and M3 for 3MM.
(8) When using different tools, please ensure that the aluminum sleeve clamps the wire rope.
